Please read -r(re-boot) as --r(re configure boot) Thanks Balanand Pinni
-----Original Message----- From: PINNI, BALANAND (SBCSI) Sent: Thursday, September 04, 2003 2:45 PM To: '"Maxim Baturin" ' Subject: RE: If I am right you can physically remove drive and reboot with -r(reconfigure for SUN only else shutdown -Fr now for AIX ) option and connect back again and do the same .Now new drive path will be assigned as character special device .Now define TSM drive on SUN /AIX and see that you can access it using respective OS cmds . If all seems ok after checking status of drive that gets configured as TSM drive ,go for defining library .Usually library does not get defined if TSM Drive is not recognized. Balanand Pinni -----Original Message----- From: "Maxim Baturin" [mailto:[EMAIL PROTECTED] Sent: Thursday, September 04, 2003 2:28 PM To: [EMAIL PROTECTED] Subject: Hi Al! I deleted drive and path in TSM and created them again... Basicaly, I already deleted library and drive and path for both of them and created them again in M... but still no luck.... Looks like some kind logical error in TSM... because checkin and checkout with checklabels from tapes works just fine.... :-(( >Maxim, >When you say "deleted and redefined drives" what > that in Solaris or TSM? I've had similar >situations (on AIX) and was successful > delete/redefining drives 1st on the OS, then in TSM. >Al >[EMAIL PROTECTED] Subject: ANR8447E No drives are currently available in library Hi everybody! I checked archives, and found some similar problems but without resolution (( So, may be some body already got the answer. After upgrading Solaris 8 to Solaris 9 and TSM from 5.1.6 to 5.1.7 our links in /dev/rmt changed order, so we had to update path defenitions to new devices names (2mt become 1mt and 0lb become 2lb) updating path for library was successful, but drive not... I continiusly was getting - invalid request for update path.... bla bla bla... So I deleted path and drive and recreated them. After everything started to work for the first look (checkout and checkin works just fine - that means drive can read labels from tapes - library does not have barcode reader) But in any action which require to mount volume I'm getting the follow messages: ANR8447E No drives are currently available in library DLT1LIB. ANR1401W Mount request denied for volume DLT819 - mount failed. It is DELL PV120TDLT1 library with only one Benchmark DLT1 drive so mount limit is 1 in devclass definition (i danced around with all possible values - mount limit drives, format =drives, dlt40, dlt40c, dlt1, dlt1c) and nothing helped..... restarting tsm couple time also does not make any effect Does any body have any idea what I can do? May be there is exist some options to get more detailed log? Regards, Maxim [EMAIL PROTECTED]
