> A dual gripper shaves some seconds off the overall time. It may be worth pointing out that a dual gripper loses you some library tape slots - 10% of them, in fact. The upper gripper cannot reach the lowest 2 slot levels, nor can the lower gripper reach the highest 2 levels. Therefore these 4 levels are lost (and are physically blanked off in our library).
It's an open question why IBM chose to do it that way, because it was surely possible to program the control PC to use the appropriate gripper for these levels. Probably that nice warm feeling of redundancy. Richard Foster
*********************************************************************** NOTICE: This e-mail transmission, and any documents, files or previous e-mail messages attached to it, may contain confidential or privileged information. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of any of the information contained in or attached to this message is STRICTLY PROHIBITED. If you have received this transmission in error, please immediately notify the sender and delete the e-mail and attached documents. Thank you. ***********************************************************************
