Geetha, The first thing I would check is whether your drives are available for use by the TSM server. It may be that the errors prior to your stopping the server, manually unloading the drives and then restarting the server resulted in the server marking the drives (or the known paths to the drives) as unavailable. Try issuing the commands "query drive" and "query path" to see what state the TSM server perceives the drives to be in. If the output reports them as "unavailable", then either (or possibly both) the "upd drive" or "upd path" commands can be used to make the drives available again. HTH.
Regards, Jack Coyle Rex Healthcare [EMAIL PROTECTED] > ---------- > From: Geetha Thanu[SMTP:[EMAIL PROTECTED] > Reply To: ADSM: Dist Stor Manager > Sent: Friday, November 21, 2003 1:14 PM > To: [EMAIL PROTECTED] > Subject: increasing mount points > > Hi all, > > I had 2 problems in tivoli. > 1.one the database was full > when the backup was going on. > 2. the error insufficient mount points. > > I increasd the database size with all ur help. > again when i stopped and started tivoli it gave these > 2 errors > ******************* > ANR8872E No path is available for drive DRIVE01 - could not unload volume > CDFD17 from drive. > ANR8358E Audit operation is required for library AUTOLIB. > ANR8470W Initialization failure on drive DRIVE01 in library AUTOLIB. > ANR8872E No path is available for drive DRIVE02 - could not unload volume > CDFD12 from drive. > ANR8358E Audit operation is required for library AUTOLIB. > ANR8470W Initialization failure on drive DRIVE02 in library AUTOLIB. > ANR8439I SCSI library AUTOLIB is ready for operations. > ***************** > > when i gave dismount it was unable to dismount and said > volume cdfd17 not available.so i stoped tivoli and manually > unmounted the tape and restarted tivoli.these r the messages > when i restarted it again. > ____________________________ > ANR8470W Initialization failure on drive DRIVE01 in library AUTOLIB. > ANR8470W Initialization failure on drive DRIVE02 in library AUTOLIB. > ANR8439I SCSI library AUTOLIB is ready for operations. > _ANR0812I Inventory file expiration process 1 completed: examined 43447 > objects, deleting 0 backup objects, 0 archive objects, 0 DB backup > volumes, > and 0 > recovery plan files. 0 errors were encountered. > ANR0985I Process 1 for EXPIRATION running in the BACKGROUND completed with > completion state SUCCESS at 10:27:35 AM. > _____________________ > > The server is up and running.but when i take backup > or restore it is giving the following error. > > --------------- > ANR0567W Retrieve or restored failed for session 32 for node SUNSERVER > (SUN SOLARIS) - insufficient mount points available to satisfy the > request. > ANR0403I Session 32 ended for node SUNSERVER (SUN SOLARIS). > > ANR0535W Transaction failed for session 43 for node SUNSERVER (SUN > SOLARIS) > - insufficient mount points available to satisfy the request. > ------------------- > > Pls guide me what to do.It is very urgent and i am a new bie > pls help.waiting for reply > > > Thanks > Geetha Thanu > Bioinformatics > CDFD,Hyderabad. > > > > > > > > > > - > >
