Hi,
We are in the process of migrating one TSM server to new server and library
hardware. Our problem is that the old library does not initialize at the new
server.
Library: ATL P3000
Environment old TSM Server:
Pseries F50, AIX 4.3.3.11; TSM Server 5.1.7.3
Environment new TSM Server:
pSeries 6F1; AIX 5.1.0.4; TSM Server 5.1.8
Library was running at the old TSM Server. Changer did not work at the new
server, but drive on the same adapter was usable (after changing the library
type from SCSI to MANUAL dsmserv restore DB worked).
Library did not initialize during TSM startup:
11/22/2003 21:40:21 ANR8300E I/O error on library ACL2 (OP=00006C01,
CC=304,
KEY=02, ASC=04, ASCQ=01,
SENSE=70.00.02.00.00.00.00.0D.0-
0.00.00.00.04.01.00.00.00.00.04.01.00.,
Description=Changer failure). Refer to Appendix D in
the
'Messages' manual for recommended action.
11/22/2003 21:40:21 ANR8440E Initialization failed for SCSI library ACL2;
will
retry in 2 minute(s).
11/22/2003 21:42:22 ANR8300E I/O error on library ACL2 (OP=00006C02,
CC=207,
KEY=FF, ASC=FF, ASCQ=FF, SENSE=**NONE**,
Description=Device is not in a state capable of
performing request). Refer to Appendix D in the
'Messages' manual for recommended action.
11/22/2003 21:42:22 ANR8441E Initialization failed for SCSI library ACL2.
Delete library path and redefine, recycling of the library and rebooting the
server did not change anything.
After switching back the library back to the old Server everything was fine!
Question: are there any known problems running an ATL P3000 libraryin the
new environment?
Hanna Hahne
Deutsches Krebsforschungszentrum
Zentrale Datenverarbeitung W020
Im Neuenheimer Feld 280
D-69120 Heidelberg
-----------------------------------------------------------------
Phone +49 6221 - 42 2357
Fax +49 6221 - 42 52 6357
Fax Dept. +49 6221 - 42 2399
E-Mail [EMAIL PROTECTED]
