Adesh,
Some 3 weeks ago I and a colleague were faced with this setup, and
after 2 days we still could not make it work. After defining everything
(and updating everything: device drivers, library and drive firmware),
the first operation (normaly a LABEL LIBVOL) would put the library path
offline without further explanations.
As we had little or no time left, we tried to gather all information
that we could in order to open a PMR. So, we installed 5.1.7.3, and what
happens? Everything works fine!
After that, we upgraded to 5.2 and applied the 5.2.1.2 patch, and it
still worked.
Unfortunately, I can't tell you what happened next, since I was
moved to another project, not knowing if a PMR was opened, and the
result if it was. I know, though, that everything is working OK.
Best regards,
Paul Gondim van Dongen
MCSE
IBM Tivoli Storage Manager Certified Consultant
VANguard - Value Added Network guardians
http://www.vanguard-it.com.br
+55 81 3225-0353
-----Mensagem original-----
De: Adesh Manjrekar [mailto:[EMAIL PROTECTED]
Enviada em: Monday,24 November 2003 10:20
Para: [EMAIL PROTECTED]
Assunto: ITSM 5.2 with 3582 GEN2 drive
Dear all
Has anybody configured the IBM 3582 lib with ITSM 5.2ver? If yes then
what driver versions have to be followed? Thanx
Warm Regards
Adesh
