To the best of my knowledge the scsi id is set by the slot position. When we boot our TSM server (win2k) with 2 2940 adapters I see the following sign on: The first adapter shows the Library as scsid 6 and the first (bottom) drive as scsid 0. The second adapter shows the second drive (which is in element 257) as scsid 1 and the third drive (element 258) as scsid 2. Hope this helps.
Terry McColgan Help Desk Support Specialist Ext. 270 Ontario College of Teachers 121 Bloor Street East, Floor 6 Toronto, Ontario M4W 3M5 [EMAIL PROTECTED] -----Original Message----- From: Prather, Wanda [mailto:[EMAIL PROTECTED] Sent: Tuesday, January 20, 2004 5:27 PM To: [EMAIL PROTECTED] Subject: New drive in TSM 3583 library - set SCSI ID (NOT) Trying to add a third LTO1 drive to a 3583 library attached to Windows TSM server. 3583 is about 9 months old, does not have the "multipath" feature. The library "sees" there is another drive, but won't let me set the SCSI id. The LED panel LOOKS like it takes the SCSI iD of 02, but when you display it again, it always goes back to 0. Anybody seen this before? Is this a microcode thing? Thanks for any help.
