In reference to original post, we finally were able to redefine library and drives
(addresses had all changed). Now we're getting these 'Changer Failure' errors. Has
anyone seen these before? They are show-stoppers apparently, because we are dead in
the water.
02/13/2004 04:01:25 ANR1002I Migration for storage pool DISKPOOL will be
retried in 60 seconds.
02/13/2004 04:01:51 ANR8943E Hardware or media error on library L700LIB
(OP=00006C03, CC=304, KEY=04, ASC=40, ASCQ=02,
SENSE=70.00.04.00.00.00.00.0C.00.00.00.00.40.02.00.00.00-
.00.00.00., Description=Changer failure). Refer to
Appendix D in the 'Messages' manual for recommended
action.
02/13/2004 04:02:01 ANR8945W Scratch volume mount failed 000478.
02/13/2004 04:02:01 ANR8381E LTO volume 000478 could not be mounted in drive
DRIVE3 (/dev/rmt12).
02/13/2004 04:02:01 ANR1404W Scratch volume mount request denied - mount
failed.
02/13/2004 04:02:01 ANR1021W Migration process 37 terminated for storage pool
DISKPOOL - storage media inaccessible.
02/13/2004 04:02:01 ANR0985I Process 37 for MIGRATION running in the
BACKGROUND completed with completion state FAILURE at
04:02:01.
Thanks!
Kelli Jones
Chesterfield County IST
[EMAIL PROTECTED]
-----Original Message-----
From: Survoy, Bernard J [mailto:[EMAIL PROTECTED]
Sent: February 13, 2004 9:21 AM
To: Jones, Kelli
Subject: RE: TSM 5.1.7.0 & Missing STK L700 Library
Kelli,
It's been a while, how are you. Couple of things:
I'm assuming AIX doesn't see the device at all???
1. In AIX, define TSM devices, add a library, but you need to know the AIX adapter
and SCSI address of the library, so see #2.
2. As far as the address of the library goes, that should be viewable from the
Operators panel.
3. You now be able to define to AIX via SMIT, device special file name should be
/dev/lb0
4. TSM PATH and LIBRARY definitions should be OK, worst case is you'll have to delete
and redefine, but I wouldn't think you should have to.
The library going MIA after code load, depends on is it MIA to AIX or MIA to TSM? I
don't think the SCSI inquiry string would have changed (which is what the TSM device
driver uses to determine what kind of library it is).
Contact me if you want to discuss further.
Thanks,
Bernie Survoy
Consulting Systems Engineer
Phone: 216 615-9324
Cell: 330 321-3787
[EMAIL PROTECTED]
StorageTek
-----Original Message-----
From: Jones, Kelli [mailto:[EMAIL PROTECTED]
Sent: February 12, 2004 6:05 PM
Subject: TSM 5.1.7.0 & Missing STK L700 Library
Need help on missing library...
It was defined as a Tivoli Storage device in AIX 5 because it is an STK L700 library.
Vendor loaded microcode..library is now MIA. Can't remember how to come up with
Parent & connector addresses. Running TSM 5.1.7.0...TSM Support guy didn't know AIX
and could not help me....
Any help would be appreciated!
Thanks,
K. Jones
Chesterfield VA
