Hi If you have defined spacetrigger then the system will do this for you automatically. If you do not have this then you will have to extend the db manually with the following command: extend db 2000 The above command will extend your database by 2Gb.
The Available Space is the Total Space available for the TSM database and the Assigned Space is the space assigned to the TSM database. If you look at the Maximum Extension value you would see that you have 2964Mb available. Add the MAX Extension and the Assigned Capacity you would get the Available Space. The MAX Extension is what you could extend your database by. When you add new raw/logical volume space to the TSM database you would notice that the Available space will increase and that the Max Extension space would also increase. At all times the Assigned Capacity and the Maximum Extension will always be equal to the Available Space. Thks Sean -----Original Message----- From: Levi, Ralph [mailto:[EMAIL PROTECTED] Sent: Thursday, March 04, 2004 2:25 PM To: [EMAIL PROTECTED] Subject: TSM DB extension - emergency My TSM DB is 97% full but appears to have more space to expand. Does it do it automatically or must I take some action. Here are the stats from q DB f=d command. I am confused about assigned capacity vs. available capacity. Can someone please help. Available Space (MB): 25,000 Assigned Capacity (MB): 22,036 Maximum Extension (MB): 2,964 Maximum Reduction (MB): 556 Page Size (bytes): 4,096 Total Usable Pages: 5,641,216 Used Pages: 5,475,462 Pct Util: 97.1 Max. Pct Util: 97.5 Thanks, Ralph �This e-mail is sent on the Terms and Conditions that can be accessed by Clicking on this link http://www.vodacom.net/legal/email.asp "
