I would check and make sure that the scsi connections (smc is scsi right?? I am using
adic so im not familiar with the ibm device names) to the library are secure and
correct. Do you just discover with cfgmgr or do you have to define them yourself.
Not sure if this will help but I found the utility "lbtest" to be invaluable because I
ran into some similar problems with my scalar 100 and I believe it was a bad scsi
cable. Lbtest will tell you if tsm recognizes the changer and drives and I believe it
comes with tsm when you install. Hope this helps.
Rick.
-----Original Message-----
From: Wilcox, Andy [mailto:[EMAIL PROTECTED]
Sent: Fri 3/5/2004 7:50 AM
To: [EMAIL PROTECTED]
Cc:
Subject: Re: Can't define IBM3583-L72 LTO library to TSM
Maybe on obvious point but are you ettin useful entries in the AIX error
log?
Many thanks
Andy Wilcox
UNIX Systems Administrator
Aquila Networks
-----Original Message-----
From: Zoltan Forray/AC/VCU [mailto:[EMAIL PROTECTED]
Sent: 05 March 2004 14:30
To: [EMAIL PROTECTED]
Subject: Re: Can't define IBM3583-L72 LTO library to TSM
Yep. Already checked all of these.
Yes, the library is online. Checked with both the web/RMU and physically.
Even power-recycled the box.
Yes, I am doing a define of the PATH to the LIBRARY, not the drives.
TAPEUTIL can't talk to the library, either.
"ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> wrote on 03/05/2004
05:13:39 AM:
> Hi Zoltan,
>
> When you say you are trying to define a path to /dev/smc0 you are trying
to
> define
> a path to the library - not the drives - so even if the drives are
> responding fine with
> the tapeutil command you can still have problems with the library - the
> drives can function
> without the library when using the tapeutil.
>
> Check if the library is not maybe in offline/paused mode - the lsdev
command
> will just show that it is happy and it can see the library - but when
TSM
> wants to talk to the library it checks additional things before defining
the
> path. Are you actualy defining the path to /dev/smc0 as a library path
or a
> drive path? What parameter are you using for the desttype - tape or
library?
>
> If you are specifying library then it sounds like your library is in
paused
> mode - check via the web interface into the 3583 what the problem is.
>
> Cheers
> Christo
>
> > I have spent hours and hours trying to get TSM server 5.2.2.0 on AIX
5.1
> > to define the PATH to the above tape library.
> >
> > Every time I click on defining the PATH (/dev/smc0) to this library,
TSM
> > goes off and spins for a while, eventually coming back with some kind
of
> > error about being unable to communicate with the device.
> >
> > I have repeately removed and rediscovered the library and drives
> > (restarted the TSM server numerous times).
> >
> > Played with tapeutil. It can successfully open the tape drives
themselves,
> > no problem.
> >
> > LSDEV says everything is happy: smc0 Available 1D-08-01 IBM 3583
Library
> > Medium Changer (FCP)
> >
> > So, what am I missing ? What am I doing wrong ?
>
> ______________________________________________
> E-mail Disclaimer and Company Information
>
> http://www.absa.co.za/ABSA/EMail_Disclaimer
****************************************************************************
************************
Confidentiality: This e-mail and any files transmitted with it are
confidential and intended solely for the use of the individual or entity to
whom they are addressed. If you have received this e-mail in error, use of
this information (including disclosure, copying or distribution) may be
unlawful. Please notify [EMAIL PROTECTED] and delete the
message immediately.
Security: Internet e-mail is not a 100% secure communications medium.
Viruses: This e-mail (and any attachments) has been checked (using Sophos
Sweep 3.68 + patches) and found to be clean from any virus infection before
leaving.
Therefore neither Aquila Networks Services Ltd nor Midlands Electricity plc
or any of their group undertakings (as defined by the Companies Act 1989)
(together referred to as the "Companies") accept legal responsibility for
this message or liability for the consequences of any computer viruses which
may have been transmitted by this e-mail.
Monitoring: All electronic communications with the Companies may be
monitored in accordance with the UK Regulation of Investigatory Powers Act,
Lawful Business Practice Regulations, 2000. If you do not consent to such
monitoring, you should contact the sender of this e-mail.
Aquila Networks Services Limited,
Registered office: Whittington Hall, Whittington, Worcester, WR5 2RB
Registered in England and Wales number 3600545
This e-mail may be sent on behalf of any of the Companies.
****************************************************************************
************************
****************************************************************************************************
Confidentiality: This e-mail and any files transmitted with it are
confidential and intended solely for the use of the individual or entity to whom they
are addressed. If you have received this e-mail in error, use of this information
(including disclosure, copying or distribution) may be unlawful. Please notify [EMAIL
PROTECTED] and delete the message immediately.
Security: Internet e-mail is not a 100% secure communications medium.
Viruses: This e-mail (and any attachments) has been checked (using Sophos
Sweep 3.74 + patches) and found to be clean from any virus infection before leaving.
Therefore neither Aquila Networks Services Ltd nor Midlands Electricity plc
or any of their group undertakings (as defined by the Companies Act 1989) (together
referred to as the "Companies") accept legal responsibility for this message or
liability for the consequences of any computer viruses which may have been transmitted
by this e-mail.
Monitoring: All electronic communications with the Companies may be monitored
in accordance with the UK Regulation of Investigatory Powers Act, Lawful Business
Practice Regulations, 2000. If you do not consent to such monitoring, you should
contact the sender of this e-mail.
Aquila Networks Services Limited,
Registered office: Whittington Hall, Whittington, Worcester, WR5 2RB
Registered in England and Wales number 3600545
This e-mail may be sent on behalf of any of the Companies.
****************************************************************************************************
