You will have to start the EXPORT from the beginning.
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Robert Ouzen
Sent: Wednesday, August 25, 2004 5:53 PM
To: [EMAIL PROTECTED]
Subject: Export quesion
Hi to all
Today I ran an export command of a few nodes and during the process after a
few hours I had an error command in one cartridge (DLT8000) couldn't be read
successfully and the process was abandonded:
08/25/2004 15:44:57 ANR8944E Hardware or media error on drive SRV4
(/dev/mt4)
(OP=LOCATE, Error Number=5, CC=306, KEY=03,
ASC=11,
ASCQ=00,
SENSE=F0.00.03.00.00.00.BA.16.00.00.F3.38.11.00-
.00.00.00.00.81.0D.90.00.00.44.B6.00.5D.47.6D.,
Description=Drive or media failure). Refer to
Appendix D
in the 'Messages' manual for recommended action.
(SESSION: 3305, PROCESS: 210)
08/25/2004 15:44:57 ANR8359E Media fault detected on DLT volume 000090
in
drive SRV4 (/dev/mt4) of library SCALAR. (SESSION:
3305,
PROCESS: 210)
08/25/2004 15:45:15 ANR0986I Process 210 for EXPORT NODE running in the
BACKGROUND processed 504589 items for a total of
24,126,583,819 bytes with a completion state of
FAILURE
at 15:45:15. (SESSION: 3305, PROCESS: 210)
My question is did I need to run the process from the beginning or can I
continue from where it was abandonded after fixing the problem on the damage
volume (move data...).
Thanks in advance .....
Regards Robert Ouzen
E-mail: [EMAIL PROTECTED]
-------------------------------------------------------------------------
FIGHT BACK AGAINST SPAM!
Download Spam Inspector, the Award Winning Anti-Spam Filter
http://mail.giantcompany.com <http://mail.giantcompany.com/>
