Hai All,
plesae specify me the command/procedure for win nt as
the drive names like "mt4.0.07" with /dev/rmt<x> on tsm.
As we have configured the tsm and we have initiated the backup from
nt server, the tape mounted message is displaying on tsm console(q actlog
and q mount)
But at win nt is unable to access the drive and backup is not happening.
the following error number on from "q actlog" is as follows
===========================================
10/09/04 19:13:57 ANR8779E (Session: 2207, Origin: CBSFS2SRV) Unable to
open drive mt4.0.0.7, error number=5.
===========================================
please help me in this regards
Regards
G V Raju
-----------------------------------DISCLAIMER----------------------------------------------------------------
This Message and any attachments (the "message") is intended solely for the addressees
and is confidential. If you receive this message in error,
please delete it and immediately notify the sender. Any use not in accord with its
purpose, any dissemination or disclosure, either whole or partial,
is prohibited except formal approval. The internet cannot guarantee the integrity of
this message. INGVysya Bank (and its subsidiaries) shall (will) not
therefore be liable for the message if modified.
