Thomas, it is my understanding that TSM device driver does not support FC connection to devices. You have to have SCSI connection to drives. In your case it means, that you have to have FC HBA, which present SCSI interface to host system (Solaris).
In your mt.conf file you have to use fo "parent" parameter value SCSI. But I am not sure if this is true also in 5.2. Hope this helps Regards Ing. Jozef Zatko Login a.s. Dlha 2, Stupava tel.: (421) (2) 60252618 "Schulz, Thomas (K-GOI-1/2)" <[EMAIL PROTECTED]> Sent by: "ADSM: Dist Stor Manager" <[email protected]> 01/10/2005 05:19 PM Please respond to "ADSM: Dist Stor Manager" <[email protected]> To [email protected] cc Subject TSM 5.2, Solaris 8 w/ STK L700 9940B drive Hi Guys, Currently I'm having problem configuring TSM mt driver on Solaris 8 with STK 9940B tape drive. I tried many different mt.conf configuration but I still got the following error: # add_drv -v /usr/kernel/drv/mt exit status = 0 devfsadm: driver failed to attach: mt exit status = 11 Warning: Driver (mt) successfully added to system but failed to attach Driver (mt) installed. Following is the configuration that I have been tried: name="mt" parent="fp" target="0" lun="0" fc-port-wwn="500104f101782200" name="mt" parent="pseudo" instance=16383 [EMAIL PROTECTED] # luxadm display /dev/rmt/6n DEVICE PROPERTIES for tape: /dev/rmt/6n Vendor: STK Product ID: 9840 Revision: 0198 Serial Num: 000992201053 Device Type: Tape device Path(s): /dev/rmt/6n /devices/[EMAIL PROTECTED],2000/SUNW,[EMAIL PROTECTED],1/[EMAIL PROTECTED],0/[EMAIL PROTECTED],5:n LUN path port WWN: 500104f101782200 Host controller port WWN: 210100e08b36c0fc Path status: Not Ready ========================= IO Cards ========================= Bus Freq Brd Type MHz Slot Name Model --- ---- ---- ---- -------------------------------- ---------------------- SYS PCI 33 4 SUNW,ifp-pciclass,0000 SYS PCI 66 5 SUNW,qlc-pciclass,0c04 0x10a SYS PCI 33 7 scsi-pciclass,001000 Symbios,53C875 No failures found in System =========================== [EMAIL PROTECTED] # cfgadm -al Ap_Id Type Receptacle Occupant Condition c6::500104f101782200 tape connected configured unknown c6::500104f101783200 tape connected configured unknown How can I fix this problem? Please help! Thanks, Thomas ForwardSourceID:NT0005576E
