Eric, Have you considered doing hardware mirroring through the SSA adapter (you'll a SSA RAID adapter for that).
Richard. "Loon, E.J. van - SPLXM" <[EMAIL PROTECTED]> Sent by: "ADSM: Dist Stor Manager" <[email protected]> 02-02-2005 19:09 Please respond to "ADSM: Dist Stor Manager" To: [email protected] cc: Subject: Re: SSA Disk performance Hi Mark! Thank you VERY much for your reply! I have checked my setting accordingly, all my LVM mirrors are set to parallel and MWC is set to no... My database and log files are located on RAW LV's too, but they are mirrored through TSM. I do see poor performance here too. My expiration runs at about 70 objects per second, while I should do much better (IBM talks about a 1000 object per second in their technote ( http://www-1.ibm.com/support/entdocview.wss?rs=663&context=SSGSG7&q1=object s%20disk%20performance%20tuning&uid=swg21141810&loc=en_US&cs=utf-8&lang=en&N otUpdateReferer=) but I would settle for 500 per second). We also tuned AIX today (vmtune -p20 -P80 -R256) and we added a second dual processor card, but performance hasn't changed a bit... Kindest regards, Eric van Loon KLM Royal Dutch Airlines -----Original Message----- From: Mark D. Rodriguez [mailto:[EMAIL PROTECTED] Sent: Wednesday, February 02, 2005 18:41 To: [email protected] Subject: Re: SSA Disk performance Hi, When using LVM mirroring you need to consider a few things. First of all judging by your symptoms I would say that your "Scheduling Policy" for that LV is not set to parallel. In parallel mode it will read the data from the drive that will respond the quickest. In sequential mode it always reads from the first copy unless there is a problem with that read and then it moves to the second copy. There is a variant of sequential "parallel write/round robin read" this time as the name suggests it round robins through the mirrors for the reads. Another performance hit can be if you are using the "Mirror Write Consistency (MWC)". MWC does not buy you that much from an availability stand point but does cost in performance. Furthermore, if you SSA cards have the battery backed up cache card it really is over kill to have MWC on at all. If you VG has many disks in it you should consider doing RAID 10, that is striped and mirrored, which will give you better performance. Although I am not sure if you can do that in AIX 4.3.3 I don't quite remember when they started supporting doing striped and mirroring through the LVM. Another comment about raw vs lvm, raw is not always faster then lvm. In fact quite often lvm will out perform the raw partition! Now on to tunning, if you are still not where you need to be there is a great deal more performance tuning that you can do. Try this first, if it is not what you need then if you search the archives there have been numerous discussion about tuning an AIX OS for a TSM environment. If those previous posts are not clear to you repost with your questions and I will see if I can help. -- Regards, Mark D. Rodriguez President MDR Consulting, Inc. ============================================================================ === MDR Consulting The very best in Technical Training and Consulting. IBM Advanced Business Partner SAIR Linux and GNU Authorized Center for Education IBM Certified Advanced Technical Expert, CATE AIX Support and Performance Tuning, RS6000 SP, TSM/ADSM and Linux Red Hat Certified Engineer, RHCE ============================================================================ === Loon, E.J. van - SPLXM wrote: >Hi *SM-ers! >We are currently struggling with our SSA disk performance. >For some strange reason we see that although all disks use LVM mirroring, >the reads are not balanced. In most case one disk is used for 60 or 70% >while it's mirror is just using 3%. >We also measured the disks performance. We created a file on a raw logical >volume and measured around 15 Mbytes/sec. We created a JFS filesystem on the >same disks and reran the test: 40 Mbytes/sec. I cannot explain this >difference! RAW should perform better that JFS on AIX 4.3.3, right? >Today we upgraded AIX to the latest maintenance level (11) and installed the >latest firmware on the disks, but performance hasn't improved. >I was hoping that TSM-ers with AIX performance knowledge can help me out >here, I'm stuck right now... >Thank you VERY much in advance for any reply!! >Kindest regards, >Eric van Loon >KLM Royal Dutch Airlines > > >********************************************************************** >For information, services and offers, please visit our web site: http://www.klm.com. This e-mail and any attachment may contain confidential and privileged material intended for the addressee only. If you are not the addressee, you are notified that no part of the e-mail or any attachment may be disclosed, copied or distributed, and that any other action related to this e-mail or attachment is strictly prohibited, and may be unlawful. If you have received this e-mail by error, please notify the sender immediately by return e-mail, and delete this message. Koninklijke Luchtvaart Maatschappij NV (KLM), its subsidiaries and/or its employees shall not be liable for the incorrect or incomplete transmission of this e-mail or any attachments, nor responsible for any delay in receipt. >********************************************************************** > > >
