Hi, Tried with the mentioned command also, still facing same error in device definition.
DAT drive is working fine checked by taking backup on /dev/st0. Regards Akash Jain . -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Behalf Of showersofblessings Sent: Monday, 16 May 2005 7:09 PM To: [email protected] Subject: Re: ANR8420E IO Error Hi, It seems like you forgot to define the path from the server to the tape drive, and the 2nd line doesn't quite look right to me. It should look like this: define drive manlib IBMDRV then define the path: define path server_name IBMDRV srctype=server desttype=drive library=manlib device=/dev/st0 That should do it. --- Akash Jain <[EMAIL PROTECTED]> wrote: > Hi, > > I am trying to define a drive in TSM level but > getting the (ANR8420E) > above-mentioned error. > > At OS level the tape drive has been defined in /dev > directory as st0 > (Seagate DAT 20/40, internal drive 4MM with IBM > stamp, 9SP40-000). The > working of DAT drive has been checked at OS level > with the tar command. > > The series of commands used are:- > > 1> define library manlib libtype=manual > 2> define drive manlib IBMDRV device=/dev/st0 > > Any suggestions are really appreciated. > > > Regards > Akash > Yahoo! Mail Stay connected, organized, and protected. Take the tour: http://tour.mail.yahoo.com/mailtour.html
