Look at your 3584 setup or operator guide. On a 3583, there is a command sequence that you enter on the library front panel that tells the library whether to record 6-digit or 8-digit barcodes. I assume it works the same way on a 3584.
-----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Scott, Mark William Sent: Monday, June 06, 2005 11:30 PM To: [email protected] Subject: New Volumes Morning all Currently installing a 3584 Library after checking in new carts into the library have a run a test backup restores etc all appears to be working fine Except for the owner and vol naming conventions when I run a q libvol output below: 3584LIB N00000L2 Private Data 1,030 LTO 3584LIB N00001L2 Scratch 1,029 LTO 3584LIB N00002L2 Scratch 1,028 LTO 3584LIB N00003L2 Scratch 1,045 LTO I have compared the barcodes etc in other libraries we have running TSM they appear similar. Though they don't come up with LTO class on the end? Also I realise until I write data to the cart that it is not owned by a server though as you can see from the output above this also not the case. I have tried to rectify this by checking all the carts out and checking them back in though this has not solved it either, any ideas would be hugely appreciated. Regards Mark
