anyone ?
----- Original Message ----- From: "goc" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Tuesday, June 07, 2005 11:13 AM Subject: hi all / sta problem / i'm going nuts
well ... client version 5.2.4.0 hpux sta version 5.2.4.0 hpux server version 5.2.4.0 aix lto 3584L32 -12 drives 2x S08 ibm switch after making my comunication work and defining shared drives and stuff with pexperimenting with paths i really dont know what to do now :-( on client/sta ANS1312E Server media mount not possible on server actlog ANR0535W Transaction failed for session 2054 for node HPTUNIX_STA (HPUX) - insufficient mount points available to satisfy the request. max mount points on client 6 :-) max scratch for coresponding prim. tapepool 20 i dont'k know where i could be wrong except on paths definition, coz with hpux i dont know how drives on client/sta (hpux client) are seen in corelation with drives from lto library ... how can i see which /dev/rmt/(1-6)m is what LTO drive ? i'm going crazy ... the pdf says : " Depending on the operating system of the Tivoli Storage Manager server, there may not be a quick way to confirm which device names on the storage agent correspond to device names on the Tivoli Storage Manager server without using a trial and error method. To confirm device names, you should work with one online drive at a time, and cycle through the storage agent device names until a successful backup can be run. The server cannot validate PATH information that is provided on the server for use by the storage agent. Failures can occur if incorrect device information is provided in the DEFINE PATH command." so it should be enough to try backup if fails change /dev/rmt/(1-6)m value in DEVICE field, restart STA and try backup again, right ? but it does not work for me !!! ----------------------------------- thanks in advance the desperate one
