I believe you need to be at TSM server 5.2.4.0 to support LTO-3. Check the supported devices matrix to be sure.
Bill Boyer "Some days you're the bug, some days you're the windshield" - ?? -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of David Longo Sent: Wednesday, June 22, 2005 1:43 PM To: [email protected] Subject: Re: LTO1 to LTO3 I am about to replace a few of my LTO1 drives with LTO3. Have started looking at all this stuff. You didn't mention the platform for TSM server. Mine is AIX and one other thing to do is make sure the Atape driver is updated for LTO3 and LTO3 WORM if you are using that, I will be. Whatever platform, there is probably some OS stuff to check on. David Longo >>> [EMAIL PROTECTED] 06/22/05 1:24 PM >>> Since LTO3 can read LTO1 media, why not just: - In TSM, delete all your drives and paths - Remove them from your OS - Remove LTO-1 drives and replace with LTO-2 drives - Allow your OS to recognize the new drives - define the drives and paths to TSM - Mark all your LTO-1 tapes as READONLY and just feed the library with LTO-3 media from now on. Since the devclass devtype is LTO no matter the flavor of LTO, you just need to make sure you specify the correct FORMAT= to be able to read the ULTRIUM tapes and read/write the ULTRIUM3C tapes. FORMAT=DRIVE should handle that. Now just let the LTO-1 tapes go away via expiration, reclamation or you can MOVE DATA them. Same storage pools and everything. Same concept as was discussed on this list with upgrading 3590 drives to higher capacity drives. Like B's to E's. Or am I on the wrong track here....? But I don't see why it wouldn't work. Bill Boyer "Some days you're the bug, some days you're the windshield" - ?? -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Meadows, Andrew Sent: Wednesday, June 22, 2005 12:09 PM To: [email protected] Subject: LTO1 to LTO3 Hello everyone again. Current configuration: TSM version 5.2.1.1 Library 3854 Drives Fibre attached LTO gen 1 (8) The higher powers here have asked me to make up a plan to migrate from LTO Gen 1 tapes to LTO Gen 3 tapes. I am putting a plan together and was wondering if anyone has done this same move and if I am missing something in my plan. 1) Upgrade to TSM Server version 5.3 2) Hardware removal of 3 LTO Gen 1 drives, replaced with LTO Gen 3 3) New Dev Class for LTO Gen 3 4) New Stg pools for LTO Gen 3 5) Migrate data 6) Remove LTO Gen 1 drives remaining 7) Remove Old Storage pools. I know this is a rather simplistic list here. I also have a few questions will I have to change TSM to recognise the full 8 character labels at this point as well? Again if anyone has done this please reply, or if you see any fundemental flaw in my plan. Thanks, Andrew ******************************************** This message is intended only for the use of the Addressee and may contain information that is PRIVILEGED and CONFIDENTIAL. If you are not the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please erase all copies of the message and its attachments and notify us immediately. Thank you. ******************************************** ############################################################## This message is for the named person's use only. It may contain confidential, proprietary, or legally privileged information. No confidentiality or privilege is waived or lost by any mistransmission. If you receive this message in error, please immediately delete it and all copies of it from your system, destroy any hard copies of it, and notify the sender. You must not, directly or indirectly, use, disclose, distribute, print, or copy any part of this message if you are not the intended recipient. Health First reserves the right to monitor all e-mail communications through its networks. Any views or opinions expressed in this message are solely those of the individual sender, except (1) where the message states such views or opinions are on behalf of a particular entity; and (2) the sender is authorized by the entity to give such views or opinions. ##############################################################
