You may find it easier to perform your restores using the VirtualNodeName option. There is a section in the QuickFacts relating to both these options;
http://tsmwiki.com/tsmwiki/-VirtualNodeNameVsFromNode Computer says 'No'.. -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Timothy Hughes Sent: Thursday, June 23, 2005 2:32 PM To: [email protected] Subject: Implementing set access on like servers Hello all, A client has six novell servers and what to give all servers access to each other for restores purposes if necessary. Is there anyone who has or done this type of setup in the past? 5 of the Novell servers are 5.2.2 and 1 is 5.3.0 Are there any possible problems with this type setup? Also is there a delete access all command I could not find one in the TSM guides. TSM client 5.2.2 and 5.3.0 TSM version 5.3.1.2 ___________________________ Disclaimer Notice __________________________ This message and any attachments are confidential and should only be read by those to whom they are addressed. If you are not the intended recipient, please contact us, delete the message from your computer and destroy any copies. Any distribution or copying without our prior permission is prohibited. Internet communications are not always secure and therefore Powergen Retail Limited does not accept legal responsibility for this message. The recipient is responsible for verifying its authenticity before acting on the contents. Any views or opinions presented are solely those of the author and do not necessarily represent those of Powergen Retail Limited. Powergen Retail Ltd is authorised and regulated by the Financial Services Authority for the sale and service of general insurance products. Registered addresses: Powergen Retail Limited, Westwood Way, Westwood Business Park, Coventry, CV4 8LG. Registered in England and Wales No: 3407430 Telephone +44 (0) 2476 42 4000 Fax +44 (0) 2476 42 5432
