One thing I have found with Windows is after any type of hardware change, whether it is a replacement or just firmware updates, Windows seems to not recognize it as the same device, and creates new ones for this same (upgraded) hardware. If you just give the TSM server a few minutes to time out on trying to initialize the library, then you can update the library path to the new device= and then update the drive paths to the new device=.
I've started stopping TSM, removing the library/drives from Device manager in Windows, doing the upgrade/replace and rebooting. I've found that Windows assigns the same devices. Then I just restart TSM and verify that all is well. I don't know if persistent mappings with the fibre adapter (if you are running fibre drives) would resolve this issue... Bill Boyer "Some days you're the bug, some days you're the windshield" - ?? -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Alexander Lazarevich Sent: Wednesday, July 06, 2005 11:21 PM To: [email protected] Subject: tsm tape path problems TSM 5.1.9.0 on win2K server. Overland Neo 4100 with 2 LTO-2 drives. I've got a bad problem, and I'm stuck trying to read the manual for clues but I'm having trouble finding what I need to know and I could really use a point in the right direction. TSM has been running just fine since I set it up more than two years ago. I used the TSM wizard to set everything up, and it was quite easy. Last week we had an LTO-2 drive failure, some bad cables, and an intermittent library controller card. All those hardware issues have been fixed. But somewhere in the mess of fixing all the hardware issues, the TSM /windows drivers for the devices got confused, and TSM is now recognizing the library and the drives as different device names. Whereas TSM used to call the devices: lb6.0.0.3 (library), mt1.0.0.3 (drive 1), and mt2.0.0.3 (drive 2); TSM is now calling those devices lb6.0.0.5, mt1.0.0.5, and mt2.0.0.5. I've tried everything I know of to fix the path between the server and the "old" devices (lb6.0.0.3), but nothing I tried worked. So, I then set out to try and define new path's for the "new" devices (lb6.0.0.5). I've done the following: - Define the new library and drives, giving them the proper names and element ID's. - Update the server's LTO Device Class, giving it the new library name lb6.0.0.5. - Add the new path's for the drives and the library: tsm: ITG-TSM>q path Source Name Source Type Destination Destination On-Line Name Type ----------- ----------- ----------- ----------- ------- ITG-TSM SERVER LB6.0.0.5 LIBRARY Yes ITG-TSM SERVER MT1.0.0.5 DRIVE Yes ITG-TSM SERVER MT2.0.0.5 DRIVE Yes But then I try to run an audit of the new library, and I get nothing: ANR2017I Administrator ALAZAREV issued command: AUDIT LIBRARY lb6.0.0.5 ANR0984I Process 5 for AUDIT LIBRARY started in the BACKGROUND at 21:42:02. ANR8457I AUDIT LIBRARY: Operation for library LB6.0.0.5 started as process 5. ANR8461I AUDIT LIBRARY process for library LB6.0.0.5 completed successfully. ANR0985I Process 5 for AUDIT LIBRARY running in the BACKGROUND completed with completion state SUCCESS at 21:42:02. The audit did nothing, as it starts and completes within a second. The library didn't move an inch. Obviously, I'm not setting up the paths properly, or the devices classes, or something. What I find odd is that when I run the Device Configuration Wizard, TSM does not find any devices. That is different from when I first installed TSM, when it found all devices automatically for me. I'm going to read Chapter 4 of the admin guide tonight when I go home, but I've already looked at it, and I can't find the information I need described in a clear manner. Any help anyone could provide, even just pointing me to some good documentation, I would appreciate it. Sorry to be a pest, but I'm in trouble, as our backups are down and I need a little help getting it back up. Thanks in advance, Alex
