Hmmm... I hate when this happens.... I found the wishdom... It was written (by myself) in the course-book ADSM 3.1 Basics... :-s
So, my excuses to everyone... Regards, Maurice ----- Original Message ----- From: "Andrew Raibeck" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Wednesday, August 31, 2005 4:47 PM Subject: Re: [ADSM-L] @Developers: Need maintenance releases? - was: Re: [ADSM-L] Upgrade strategy - was "GetBootPath: error on QueryDosDevice()" > I'm not aware that there was ever a requirement for a base-level install, > at least for the regular backup-archive clients (not sure about TDPs, at > the least, there might be a base-level install required for the license). > If you are referring to the the backup-archive client, do you have a > specific example you can point to that illustrates when the README > indicated otherwise? > > Regards, > > Andy > > Andy Raibeck > IBM Software Group > Tivoli Storage Manager Client Development > Internal Notes e-mail: Andrew Raibeck/Tucson/[EMAIL PROTECTED] > Internet e-mail: [EMAIL PROTECTED] > > The only dumb question is the one that goes unasked. > The command line is your friend. > "Good enough" is the enemy of excellence. > > "ADSM: Dist Stor Manager" <[email protected]> wrote on 2005-08-31 > 06:11:33: > > > Dear Developer, > > > > In the readme's of the clients there is no requirements anymore for a > > base-level installation of the client. > > Does that mean it's always safe to install a patch-release of a client > > without the maintenance release? > > > > Thanks in advance, > > Maurice van 't Loo > > > > > > ----- Original Message ----- > > From: "Henrik Wahlstedt" <[EMAIL PROTECTED]> > > To: <[email protected]> > > Sent: Tuesday, August 30, 2005 6:33 PM > > Subject: Re: [ADSM-L] Upgrade strategy - was "GetBootPath: error on > > QueryDosDevice()" > > > > > > Hum... > > > > Exactly where? I havent had time to set my brain to TSM mode after three > > weeks of vacation. But as far as I remember I > > never had any problems what so ever installing a patch, witout > > installing 5.x.y.0 first. > > ftp://service.boulder.ibm.com/storage/tivoli-storage-management/maintena > > nce/client/v5r1/Windows/WinNT/v516/IP22660_READ1STC.TXT > > > > ftp://service.boulder.ibm.com/storage/tivoli-storage-management/patches/ > > client/v5r1/Windows/WinNT/v516/IP22660_6_READ1STC.TXT > > > > -H. > > > > > > -----Original Message----- > > From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of > > Maurice van 't Loo > > Sent: 30. august 2005 16:42 > > To: [email protected] > > Subject: Re: Upgrade strategy - was "GetBootPath: error on > > QueryDosDevice()" > > > > It's in the readme.... > > > > ----- Original Message ----- > > From: "Henrik Wahlstedt" <[EMAIL PROTECTED]> > > To: <[email protected]> > > Sent: Tuesday, August 30, 2005 4:26 PM > > Subject: [ADSM-L] Upgrade strategy - was "GetBootPath: error on > > QueryDosDevice()" > > > > > > No problem and I agree. > > I have never read anything about the client base level requirement > > before installing a patch on a Windos client. > > Where did you find that information? > > > > //Henrik > > > > -----Original Message----- > > From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of > > Maurice van 't Loo > > Sent: den 30 augusti 2005 15:51 > > To: [email protected] > > Subject: Re: GetBootPath: error on QueryDosDevice() > > > > Yes, sorry... > > 5.1.5 was a baselevel also... That was a very strange releasenumber.... > > I think it should be 5.2... but hey, my meaning is that 5.3 should be > > 6.1... i don't understand the versions completely.... > > > > But normaly the full versions are x.x.0.0 for servers and x.x.x.0 for > > clients. > > > > Regards, > > Maurice > > > > ----- Original Message ----- > > From: "Henrik Wahlstedt" <[EMAIL PROTECTED]> > > To: <[email protected]> > > Sent: Tuesday, August 30, 2005 3:20 PM > > Subject: Re: [ADSM-L] GetBootPath: error on QueryDosDevice() > > > > > > Hi Maurice, > > > > As far I remember it is 5.1.5 that i base level for 5.1.9 server. > > And is that true, that I really need to install "base level" before I > > apply a patch on a client? > > > > //Henrik > > > > > > > > -----Original Message----- > > From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of > > Maurice van 't Loo > > Sent: den 30 augusti 2005 13:23 > > To: [email protected] > > Subject: Re: GetBootPath: error on QueryDosDevice() > > > > Hi Hendrik, > > > > I see that use version 5.1.6.6 client. > > Did you installed the right version? You cannot use this version without > > the base version 5.1.6 installed first. > > > > You don't get any error when you install it, but it can give very > > strange problems when using. > > > > Same for the server: first 5.1.0.0, then 5.1.9.0, then a patchlevel when > > needed. > > > > Regards, > > Maurice > > > > > > > > > -----Original Message----- > > > From: Henrik Wahlstedt [mailto:[EMAIL PROTECTED] > > > Sent: Tuesday, August 30, 2005 12:32 > > > To: [email protected] > > > Subject: GetBootPath: error on QueryDosDevice() > > > > > > > > > Hello, > > > > > > I wonder what this error mean and why I get it? After googling for > > > GetBootPath and QueryDosDevice() but with no luck. I have found > > > similar questions on list but no answers. Do anyone have any idea what > > this is? > > > > > > 29-08-2005 20:06:19 GetBootPath: error on QueryDosDevice() for C:\, rc > > > > > = 998 > > > 29-08-2005 20:06:19 GetBootPath: error on QueryDosDevice() for E:\, rc > > > > > = 998 > > > 29-08-2005 20:06:19 Boot path was not found. Assumed > > boot > > > path as C:\ > > > > > > 5.1.6.6 Windows client and 5.1.9 server. > > > > > > > > > //Henrik > > > > > > > > > ------------------------------------------------------------------- > > > The information contained in this message may be CONFIDENTIAL and is > > > intended for the addressee only. Any unauthorised use, dissemination > > > of > > the > > > information or copying of this message is prohibited. If you are not > > > the addressee, please notify the sender immediately by return e-mail > > > and > > delete > > > this message. > > > Thank you. > > > > > > > > > ********************************************************************** > > > For information, services and offers, please visit our web site: > > http://www.klm.com. This e-mail and any attachment may contain > > confidential and privileged material intended for the addressee only. If > > you are not the addressee, you are notified that no part of the e-mail > > or any attachment may be disclosed, copied or distributed, and that any > > other action related to this e-mail or attachment is strictly > > prohibited, and may be unlawful. If you have received this e-mail by > > error, please notify the sender immediately by return e-mail, and delete > > this message. Koninklijke Luchtvaart Maatschappij NV (KLM), its > > subsidiaries and/or its employees shall not be liable for the incorrect > > or incomplete transmission of this e-mail or any attachments, nor > > responsible for any delay in receipt. > > > ********************************************************************** > > > > > > > > > ------------------------------------------------------------------- > > The information contained in this message may be CONFIDENTIAL and is > > intended for the addressee only. Any unauthorised use, dissemination of > > the information or copying of this message is prohibited. If you are not > > the addressee, please notify the sender immediately by return e-mail and > > delete this message. > > Thank you. > > > > > > ------------------------------------------------------------------- > > The information contained in this message may be CONFIDENTIAL and is > > intended for the addressee only. Any unauthorised use, dissemination of > > the information or copying of this message is prohibited. If you are not > > the addressee, please notify the sender immediately by return e-mail and > > delete this message. > > Thank you. > > > > > > ------------------------------------------------------------------- > > The information contained in this message may be CONFIDENTIAL and is > > intended for the addressee only. Any unauthorised use, dissemination of > the > > information or copying of this message is prohibited. If you are not the > > addressee, please notify the sender immediately by return e-mail and > delete > > this message. > > Thank you. >
