hi, done that a month ago with 6 LTO3 drive in it, well it is a big deal ... if you read one of my previous posts you might seen that primary library makes a microcode downgrade on expansion rack controler i whatever case, another thing is if you are having low microcode on primary frame the primary library controler will not recognize the expansion frame when his barcode reader makes his way to the "unknown", so ... upgrade your microcode on L32 to the max before doing this operation, if you prepared everything before starting the upgrade estimated time can be around 4-6 hours including TSM reconfiguration, if not expect an whole-day operation :-)
peace, goran ----- Original Message ----- From: "William Boyer" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Wednesday, October 05, 2005 7:09 PM Subject: Adding a D52 frame to my 3584 library
A new D52 frame (no drives, just slots) has been ordered for my 3584 library. This is the first expansion frame. ANyone out there been through this before? Any issues I should watch out for with TSM? How much time does IBM require for the installation? Bill Boyer "Growing old is mandatory, growing up is optional" - ??
