Neil, once the storage slots are defined for the logical libraries, by checking in the volumes the library is addressed, e.g. by use of the command:
LABEL libvol <libraryname> search=yes volrange=<volumename>,<volumename> labelsource=barcode checkin=scratch best regards, Kirsten Glöer Forschungszentrum Karlsruhe GmbH Institut für Wissenschaftliches Rechnen (IWR) Hermann-von-Helmholtz-Platz 1 Tel.: +49 (0)7247-82-8616 76344 Eggenstein-Leopoldshafen Fax: +49 (0)7247-82-4972 Deutschland e-mail: [EMAIL PROTECTED] -----Ursprüngliche Nachricht----- Von: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Im Auftrag von Neil Sharp Gesendet: Freitag, 7. Oktober 2005 12:29 An: [email protected] Betreff: Re: [ADSM-L] AW: [ADSM-L] AW: [ADSM-L] Forcing certain nodes to use selective tape drives? Kirsten Thank you again for your help. One further question. The configuration that i need to implement involves a mixture of LTO1 and LTO2 drives and relevant media. My concern is the media. When you import media into the library, how can you ensure that LTO1 media goes to the LTO1 library and LTO2 to the LTO2 library? I don't want one grabbing the other ones media. Regards Neil Sharp <[EMAIL PROTECTED]>, Technical Support & TSM Consultant Direct Line : 01256-306686 Mobile: 07811-199312 Office : 01256-811125 Ext 223 Syan Limited, Riverside View, Basing Road,Old Basing, Basingstoke, Hampshire, RG24 7AL "Gloeer, Kirsten" <[EMAIL PROTECTED]> Sent by: "ADSM: Dist Stor Manager" <[email protected]> 07/10/2005 11:18 Please respond to "ADSM: Dist Stor Manager" <[email protected]> To [email protected] cc Subject AW: [ADSM-L] AW: [ADSM-L] Forcing certain nodes to use selective tape drives? Hi Neil, yes, we have separated a library in three logical libraries. You do not need a license. Just use the library web interface, go to Settings -> Library Configuration -> Launch Configuration Wizard and select the drives and storage slots for the first and for the second library. best regards, Kirsten Glöer Forschungszentrum Karlsruhe GmbH Institut für Wissenschaftliches Rechnen (IWR) Hermann-von-Helmholtz-Platz 1 Tel.: +49 (0)7247-82-8616 76344 Eggenstein-Leopoldshafen Fax: +49 (0)7247-82-4972 Deutschland e-mail: [EMAIL PROTECTED] -----Ursprüngliche Nachricht----- Von: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Im Auftrag von Neil Sharp Gesendet: Freitag, 7. Oktober 2005 11:41 An: [email protected] Betreff: Re: [ADSM-L] AW: [ADSM-L] Forcing certain nodes to use selective tape drives? Hi Kirsten Thanks for your speedy response. Have you actually done this successfully? Do you need a license to LPAR the library? Regards Neil Sharp <[EMAIL PROTECTED]>, Technical Support & TSM Consultant Direct Line : 01256-306686 Mobile: 07811-199312 Office : 01256-811125 Ext 223 Syan Limited, Riverside View, Basing Road,Old Basing, Basingstoke, Hampshire, RG24 7AL "Gloeer, Kirsten" <[EMAIL PROTECTED]> Sent by: "ADSM: Dist Stor Manager" <[email protected]> 07/10/2005 10:22 Please respond to "ADSM: Dist Stor Manager" <[email protected]> To [email protected] cc Subject AW: [ADSM-L] Forcing certain nodes to use selective tape drives? Hi, the 3584 tape library can be configured in several logical libraries.The 4 SCSI LTO1 drives can be configured in the first logical library with the control path defined on the first SCSI LTO1 drive. The 4 FC LTO2 drives can be configured in the second logical library with the control path defined on the first FC LTO2 drive. It is possible to configure two libraries within one TSM Server. For each logical library a deviceclass and a storagepool has to be defined. best regards, Kirsten Glöer Forschungszentrum Karlsruhe GmbH Institut für Wissenschaftliches Rechnen (IWR) Hermann-von-Helmholtz-Platz 1 Tel.: +49 (0)7247-82-8616 76344 Eggenstein-Leopoldshafen Fax: +49 (0)7247-82-4972 Deutschland e-mail: [EMAIL PROTECTED] -----Ursprüngliche Nachricht----- Von: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Im Auftrag von Neil Sharp Gesendet: Freitag, 7. Oktober 2005 11:06 An: [email protected] Betreff: [ADSM-L] Forcing certain nodes to use selective tape drives? Can anybody help with the following problem? I have a customer that currently has a 3584 tape library with 4 SCSI LTO1 tape drives configured to a AIX TSM 5.1.9 server. They have asked me to add an additional 4 LTO2 SAN attached drives to the same TSM server / library configuration. So in essence the one TSM server will now have 8 drives. The question that I need to answer is this. Is it possible within the one TSM server to control which client backs up to which drive? The reason that I am asking this is that the customer wants to split their production backups to go to the new SAN drives, and their development backups to go to the SCSI drives. My thoughts are that this is not possible from the one TSM server as TSM will pick a drive at random if all 8 drives are configured within the same library. I believe that the only way that this would be possible is to configure two TSM servers to share the same physical library (once it has been partitioned). Each TSM server will then be configured with a library a piece, each accessing 4 drives. Backup nodes can then be assigned to the relevant TSM server. Your comments / experience would be very much appreciated. Regards
