I work in the 3494 work but we have 3590J and 3590K tapes. To control what gets written to each, we define the K tapes to storage pools and let the J tapes be used as scratch tapes. Then we control who writes to which tapes by assigning them to the appropriate storage pool. Could you do something similar to force your production backups to only use LTO2 tapes?
>>> [EMAIL PROTECTED] 10/07/05 5:05 AM >>> Can anybody help with the following problem? I have a customer that currently has a 3584 tape library with 4 SCSI LTO1 tape drives configured to a AIX TSM 5.1.9 server. They have asked me to add an additional 4 LTO2 SAN attached drives to the same TSM server / library configuration. So in essence the one TSM server will now have 8 drives. The question that I need to answer is this. Is it possible within the one TSM server to control which client backs up to which drive? The reason that I am asking this is that the customer wants to split their production backups to go to the new SAN drives, and their development backups to go to the SCSI drives. My thoughts are that this is not possible from the one TSM server as TSM will pick a drive at random if all 8 drives are configured within the same library. I believe that the only way that this would be possible is to configure two TSM servers to share the same physical library (once it has been partitioned). Each TSM server will then be configured with a library a piece, each accessing 4 drives. Backup nodes can then be assigned to the relevant TSM server. Your comments / experience would be very much appreciated. Regards
