Thanks Bos, Neil and Richard!
"Bos, Karel" wrote: > Hi, > > A while ago we had these errors also. In our case these errors where > seen during migration (diskp -> tapepool) and/or backup stg diskpool -> > copypool. > > In only one case we could pin point it to hardware failures (one disk at > breaking point in the diskpool). In all other cases it seems to be > network related (corrupted data frames). > > After a couple of back-up runs, the errors went away and I haven't seen > them back yet. (server park is relocated and replaced). > > Regards, > > Karel > -----Original Message----- > From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of > Timothy Hughes > Sent: dinsdag 1 november 2005 19:36 > To: [email protected] > Subject: ANR13300E & ANR1331E > > Hello, > > The following message appears in our TSM server log frequently now. This > occurs on an input tape in our remote pool during the remotepool's > (tapepool) Reclamation. I usually do a audit volume xxxxx fix=yes and > that takes care of the damaged file(s) on that tape but the issue comes > right back on a different tape. > > ANR1330E The server has detected possible corruption in an object being > restored or moved. The actual values for the incorrect frame are: magic > 53454652 hdr version 0002 hdr length 0032 sequence number 00000381 data > length 00000000 server id 00000000 segment id 0091556997627906 crc > 00200000. > > ANR1331E Invalid frame detected. Expected magic 53454652 sequence > number 00000381 server id 00000000 segment id 0000000006387883. > > ANR1330E The server has detected possible corruption in an object being > restored or moved. The actual values for the incorrect frame are: magic > 53454652 hdr version 0002 hdr length 0032 sequence number 00000349 data > length 00000000 server id 00000000 segment id 60002793965424476 > 48 crc 0000015D. (PROCESS: 996) > > ANR1331E Invalid frame detected. Expected magic 53454652 sequence > number 00000349 server id 00000000 segment id 0000000006169139. > (PROCESS: 996) > > I search the Archives and didn't actually find and satisfactory answer. > Other than damaged files? > Has anyone had this issue occur. > > TSM 5.1.3.4 > RS/6000 AIX 5.2 > > Thanks for any reply's in Advance!
