"ADSM: Dist Stor Manager" <[email protected]> wrote on 11/30/2005 04:22:18 PM: > Bingo! > > I thought i'd checked all the ends but when I went to remove the short > cable daisy-chaining the one good drive to the one bad drive, I found > a bent pin on the end of the cable I had not previously checked. I was > removing it because the first device was working in the chain and the > second was not. Perhaps the cable itself was bad I thought. Turns out > it was just a bent pin..
"...as it so often is, sayeth the Master." -- Mark Stapleton ([EMAIL PROTECTED]) ------------------------------------------------------------------------------ Electronic Privacy Notice. This e-mail, and any attachments, contains information that is, or may be, covered by electronic communications privacy laws, and is also confidential and proprietary in nature. If you are not the intended recipient, please be advised that you are legally prohibited from retaining, using, copying, distributing, or otherwise disclosing this information in any manner. Instead, please reply to the sender that you have received this communication in error, and then immediately delete it. Thank you in advance for your cooperation. ==============================================================================
