I was first told to put in ionocopy off in my server options file to resolve one problem and then latter I was told to remove this option as it cause other problems. When I query ionocopy option it now shows on. Your statement is if it is enable then remove it from your option file. Is 'ON' enable or disable, sorry the query shows on or off and not enable or disable.
-----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of L'Huillier, Denis (GTI) Sent: Thursday, February 09, 2006 7:52 AM To: ADSM-L@VM.MARIST.EDU Subject: Re: BACKUP STGPOOL or MOVE DATA Error Contact support. I had a similar situation. Here's the synopsis: The data is corrupt but may be recoverable via a PTF. New storage pools defined with 5.3 will verify the data before moving to a different pool. If the data is corrupt it will not move the data so recovery efforts can be initiated. There is a known problem which you may be experiencing and is recoverable. All your disk pools should have the "verifyData=True" option setting which can only be viewed via "show sspool". If "verifyData=False" then "upd stg xxxxx VERIFYDATA=YES" should be issued. This option will give you the error below instead of moving corrupt data to another pool. Issue "q opt ionocopy" from the server. If this is enable remove it immediately from your server options file.