Instead of using wait=yes on the run commands, use that in the commands within the individual scripts. ie:
run script1 run script2 run script3 run script4 If script1,2,3,4 all have TSM commands that run in the foreground either by design or using wait=yes, then those scripts will run serially like you desire - you can also look at using the new serial and parallel commands. It's easy to test out your individual scripts by just running them from the command line - if the script runs through and returns your prompt right away all the commands are running in the background. If the prompt doesn't come back until everything in the script is finished, then everything is running in the foreground like you want. This is where the new migrate stgpool and reclaim stgpool commands come in handy because they can be forced to run in the foreground now, which wasn't possible before. ______________________________ John Monahan Consultant Infrastructure Solutions Group Computech Resources, Inc. Office: 952-833-0930 ext 109 Cell: 952-221-6938 http://www.computechresources.com Timothy Hughes <[EMAIL PROTECTED]> Sent by: "ADSM: Dist Stor Manager" <[email protected]> 02/14/2006 08:05 AM Please respond to "ADSM: Dist Stor Manager" <[email protected]> To [email protected] cc Subject Re: AW: [ADSM-L] Automating server scripts Hello all, I set up a script to run every hour. with the following commands in the script. When I run the script I receive a invalid parameter error for the wait parameter. /* This script queries the backuppool stgpool then stops migration on the backuppool stgpool*/ run test_query_script wait=yes run stop_disk_mig_script wait=yes run test_query_script The wait parameter is invalid can this be used in this sequence? Thanks for any help! ANR2020E RUN: Invalid parameter - WAIT. ANR2020E RUN: Invalid parameter - WAIT. Storage Device Estimated Pct Pct High Low Next Pool Name Class Name Capacity Util Migr Mig Mig Storage Pct Pct Pool ----------- ---------- ---------- ----- ----- ---- --- ----------- ARCHIVEPOOL DISK 63 G 0.0 0.0 90 70 H3592POOL BACKUPPOOL DISK 1,014 G 67.6 67.6 70 40 H3592POOL H3592POOL 3592CLASS 266,231 G 25.8 31.4 90 70 MIGPOOL DISK 84 G 12.8 12.8 75 50 H3592POOL R3592POOL 3592RCLASS 270,464 G 25.4 ANR1462I RUN: Command script TEST_QUERY_SCRIPT completed successfully. ANR1462I RUN: Command script GLOBAL_SCRIPT completed successfully. PAC Brion Arnaud wrote: > Timothy, > > You should build an admin schedule, which initiates something like "run Global_script", and then in this "global_script", have all of your commands, like: > > run test_query_script wait=yes > run stop_disk_migration wait=yes > run test_query_script > > Hope this helped ! > Cheers. > > Arnaud > > ****************************************************************************** > Panalpina Management Ltd., Basle, Switzerland, > CIT Department Viadukstrasse 42, P.O. Box 4002 Basel/CH > Phone: +41 (61) 226 11 11, FAX: +41 (61) 226 17 01 > Direct: +41 (61) 226 19 78 > e-mail: [EMAIL PROTECTED] > ****************************************************************************** > > -----Original Message----- > From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Timothy Hughes > Sent: Thursday, 09 February, 2006 16:34 > To: [email protected] > Subject: Re: AW: [ADSM-L] Automating server scripts > > Hello all, > > I ran this via the admin schedule but it just seem to execute the first part of the script (run test_query_script)? > do I need a second admin schedule to kick off the next script and so on? If so how would the serial part of the command be incorporated into to that? I tried wait=yes and the server log showed Invalid parameter - WAIT > > thanks > > CHECK_STGPOOL > Description TEST SCRIPT COMMAND > Command run test_query_script serial run stop_disk_migration serial run test_query_script Priority 5 Start date 2006-02-08 Start time 08:13:00 Duration 15 Duration units MINUTES Period 1 Period units HOURS Day of Week ANY Expiration - Active? YES Last Update Date/Time 2006-02-09 08:11:40.000000 Last Update by (administrator) Managing profile - Schedule Style CLASSIC Month - Day of Month - Week of Month - > > Bill Kelly wrote: > > > I think that's correct; if you want the scripts to run in parallel, you'll need multiple admin schedules. If you want the scripts to run serially, you could kick off the first script via an admin schedule, then have that script run the second script, and so on... > > > > -Bill > > > > Bill Kelly > > Auburn University OIT > > 334-844-9917 > > > > >>> [EMAIL PROTECTED] 02/08/06 9:04 AM >>> > > Multiple scripts inside an admin schedule? > > I believe each schedule can contain one cmd/script... > > You may have to create multiple schedules, one for each server script. > > > > -----Original Message----- > > From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf > > Of Timothy Hughes > > Sent: Wednesday, February 08, 2006 9:55 AM > > To: [email protected] > > Subject: Re: [ADSM-L] AW: [ADSM-L] Automating server scripts > > > > Thanks to all! > > > > I know about the admin scheduler already, I just wasn't sure if I > > could put multiple scripts inside a admin schedule and run them > > simultaneously say every 3 hours. I guess I would use multiple run > > commands? > > > > Thanks again! > > > > Bill Kelly wrote: > > > > > Sorry...obviously, one should substitute > > > > > > cmd="run script-name" > > > > > > for > > > > > > cmd="q proc" > > > > > > but you all knew what I meant. :-) > > > > > > > To be more specific, set up the schedule with something a>long the lines of this: > > > > def sched queryproc t=a desc="query processes" cmd="q proc" > > > > startt=13:59:00 dur=15 duru=m day=any per=1 peru=hours active=yes > > > > Which will run the script every hour at (roughly) xx:59:00 > > > > > > -Bill > > > > > > >>> [EMAIL PROTECTED] 02/08/06 7:49 AM >>> > > > Simple:Build an admin scheduler with command run script ;-) > > > > > > > > > > > > -----Ursprüngliche Nachricht----- > > > Von: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Im > > > Auftrag von Timothy Hughes > > > Gesendet: Mittwoch, 8. Februar 2006 14:48 > > > An: [email protected] > > > Betreff: [ADSM-L] Automating server scripts > > > > > > Hello, > > > > > > Does anyone know of a way to Automate sever scripts to run on there own?? I have scripts set up that I would like to run say every two hours. I know to run a script you would use the run command but can that be automated? > > > > > > TSM 5.3.2.1 > > > AIX 5.3 > > > > > > Thanks for any help or suggestions > > > > > > Regards > > -------------------------------------------------------- > > > > If you are not an intended recipient of this e-mail, please notify the sender, delete it and do not read, act upon, print, disclose, copy, retain or redistribute it. Click here for important additional terms relating to this e-mail. http://www.ml.com/email_terms/ > > --------------------------------------------------------
