Well, hmmm. Closest I can come to this configuration is 5.1.5.13 on Mac OS 10.2. A file called "TSM Mac X Scheduler Daemon" has to be placed in the Startup Items. I'm not certain if the scheduler for anything higher than 5.2 would work properly on a Mac OS lower than 10.2.
On Feb 17, 2006, at 3:08 PM, Nancy Reeves wrote:
I am very inexperienced with Macs and our Mac person is inexperienced with TSM, so we have to team up but can usually figure out problems. We only have 10 Macs. This is the only one at 10.1. Mac support person installed TSM BA client 5.2.4 on a Mac with OS 10.1 recently. (Server is 5.2.2 on AIX.) The client can connect, and a manual backup works. We used the Setup Wizard to configure the CAD and Scheduler, but the scheduler does not seem to be running. When it is rebooted, there are no messages in the activity log indicating contact. There is no dsmched.log, although the location appears to be defined correctly (the default). We confirmed that energy saver is not powering off the hard disk at night. As the Mac client manual suggests, we checked with 'sudo ps -x | grep dsmcad' for the process and did not find it; the only match was the grep looking for it. Any help would be appreciated! Nancy Reeves Technical Support, Wichita State University [EMAIL PROTECTED] 316-978-3860
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Michelle Mogil, [EMAIL PROTECTED] Systems & Operations, CIT Cornell University, Ithaca, NY 14853 USA vox: 607-255-0516 fax: 607-255-8521
