You can still create DRM tapes. Just do the "backup stg diskpool copypool" prior to the migrate of diskpool to tapepool so the data is still in the diskpool. This way you are always copying from disk to tape. No need for tape to tape copy. This is applicable to all environments, not just one with one tape drive.
-----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of MUHAMMAD SADAT ANWAR Sent: Thursday, April 27, 2006 1:24 AM To: [email protected] Subject: Re: [ADSM-L] Recommended policy for single drive scenario Dear mario, If you have 300GB of data to backup everyday, then you can insert your tape into the drive and schedule all the client backups accordingly to be backedup to that tape. Still if you want to keep one tape for everyday, then you need to take selective backups for everyday. I once had a configuration with one tape drive withthe following: I used normal configuation of all the policies as if i had a library. Keeping 9999 versions of data exists, and 9999 versions of data deleted. Retain extra and Retain Only versions as 32. This was done for my daily backups. I was taking incremental backups and was fine with the amount of data backedup daily. I was taking backups on diskpool in the night with schedules, and would migrate all the data to Primary tape pool. Effectively since you can not make DR tapes here, once your data is moved to Tape, you run prepare and then you backup the database onto separate tape. This set of tapes with DB backup and a floppy containing your plan file would also behave like a DR tapes set. Keep your DB expire, volume reuse delay to same as per your requirements that to which day you might need to revert in case of disaster. I would recommend that you keep these tapes and floppies into a fire proof and heat resistant vault at your location. You can not efffectively send these tapes to offsite since you would need these tapes daily. While you are backingup your data daily on a single tape or a set of tapes, reclaimation would arrive after 32 days. At this time you need some extra space to create migration pool on your hard disk. This would be a temporary pool that will hold your data in the process of reclaimation. You should set reclaimation to 100 percent in normal days and turn it on to for example 60 when you think you need to perform reclaimation. Sadi ---- [EMAIL PROTECTED] wrote : > Hi Muhammad, > > There are about 20 or 30 clients. I guess that 100GB is available at the > server for use by the diskpool. > > I was thinking about trying to use TSM like smaller backup softwares like > ArcServe, using a tape for each day of the week (from Monday to Friday). I > know that the smart thing to do would be to have a second drive.........I´ve > already installed and configured TSM with automated tape > libraries.........but this customer is a small company and they will not > change anything on their environment..........so, it will be the operator´s > responsibility to change tapes everyday and to perform no reclamation > whatsoever. > > Any suggestions on how to configure a TSM policy for such scenario ? > > Thanks. > > Mario > > > > ----- Original Message ---- > From: Muhammad Sadat Anwar <[EMAIL PROTECTED]> > To: [email protected] > Sent: Wednesday, April 26, 2006 3:18:01 PM > Subject: Re: Recommended policy for single drive scenario > > Mario, > 1- In the first place .. how many client nodes are there? > 2- How much space is there on your local hard disk for diskpool? > > 3- Your option of collocating the backups would eliminate if you run > scheduled backups directly to tape. > 3-Reclaimation would require quite alot of space again on your local machine. > 4- If you are looking for DRM, it would be quite a time consuming and manual > work. > > These are just the basics, know that TSM is actually built to reduce > your pain of managing and taking backups if its utilized appropriately. > Giving it a hard time with reduced resources would turn your life miserable > abit. > > I suggest you go for atleast 2 tape drives (if you can't afford tape library) > for appropriate DR and Reclaimation. > > Sadi > Manager Systems IT > ABAMCO limited > Pakistan > > > Mario Behring wrote: > > > <!-- DIV {margin:0px} -->Hi list, > > > > The environment is TSM 5.3.2 running on a W2003 box connected with a single > > drive SCSI tape unit (SDLT3). The total amount of data to be backed up is > > about 300GB and the tapes are 400GB/800GB capacity. > > > > What is the recommended policy for such an environment? > > ...........considering that there is only one drive and that each tape has > > enough space to store the whole data. > > > > Please advise. > > > > Mario > > _____________________________________________________ Sent via SUPERwebmail - Supernet web-based email service http://www.super.net.pk/mail "This e-mail and any attachments may contain confidential and privileged information. Any dissemination or use of the information by a person other than the intended recipient is unauthorized and may be illegal. If you are not the intended recipient, please notify the sender immediately by return e-mail, delete this e-mail and destroy any copies. Although this e-mail and any attachments are believed to be free of any virus or other defect that might affect any computer system into which it is received and opened, it is the responsibility of the recipient to ensure that it is virus free and no responsibility is accepted by the Board of Trade of the City of New York, Inc. or the New York Clearing Corporation for any loss or damage arising in any way from its use. Thank you."
