Hi Check out your tsafs.nlm start-up settings. It must be set to ClusterEnable No (as TSM is in Novell terms a not cluster aware application. Only ArcServe and BackupExec are.) If this is set to yes volumes with long filenames will be backed up in 8.3. This means TSM will not recognise changes in long filenames. But it will restore the first backed up long filename.
Cheers Marco Kind Regards Marco Malgarini Malga Consulting -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Robert Ouzen Ouzen Sent: Wednesday, 10 May 2006 00:05 AM To: [email protected] Subject: Re: [ADSM-L] Novell question !!!!!! Hi Troy Here what I got running VOLUMES in the Netware server: 3 local FAT volumes mounted Mounted Volumes Name Spaces Flags SYS DOS, MAC, NFS, LONG NSS _ADMIN DOS, MAC, NFS, LONG NSS P VOL1 DOS, MAC, NFS, LONG NSS EV2 DOS, MAC, NFS, LONG NSS EV1 DOS, MAC, NFS, LONG NSS 5 volumes mounted Can you explain a little beat more about "load long" ????? It is a novell command ???? And how to add name space long to EV1: ???? Can you send me an example !!!!! Thanks in advance ..... Robert -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Troy Frank Sent: Tuesday, May 09, 2006 4:45 PM To: [email protected] Subject: Re: Novell question !!!!!! sys: & vol1: appear to be getting recognized as "long filename" filesystems under the "Type" column, while ev1: isn't. Is EV1: an nss volume, or traditional? In my case, I've got a couple servers attached to ibm ds4300's (fastt600), where sys: is local, and vol1: is on the san. When I do a "q files", both sys: and vol1: are listed as type "NTW:LONG" even though vol1: isn't a local volume. If it turns out that the EV1: volume just never got the "Long" namespace added to it, you can do a "load long", then "add name space long to ev1:". If EV1: is an nss volume, I'm not quite sure what happened.....they're supposed to have the LONG namespace added by default. >>> [EMAIL PROTECTED] 5/9/2006 7:42 AM >>> Hi to all I have a Netware server with sys: and vol1: local volumes and mounted a disk on a clariion storage EV1: Here the output of the command Q FILES tsm> q files # Last Incr Date Type File Space Name --- -------------- ---- --------------- 1 00/00/0000 00:00:00 NTWFS NWCC-CL2\EV1: 2 05/06/2006 22:00:04 NovellSMS NWCC-CL2\SERVER SPECIFIC INFO 3 05/06/2006 22:34:38 NTW:LONG NWCC-CL2\SYS: 4 05/02/2006 22:34:04 NTW:LONG NWCC-CL2\VOL1: Few questions, I did an online backup of EV1: without any problems , I connect the client via internet http://xxx.xx.xx.xx:1581 and saw the directories and files on the restore panel, my first question is why when I load the backup I see just the local volumes sys: and vol1: (I have in my dsm.opt the line DOMAIN all-local EV1:) and after changes I unload and load dsmcad ...... My second question is why in the restore panel I see directories with long names (+8) in dos format xxxxxx~1. My tsm client version is 5.3.012 and my Netware server version is 6.5 Any help will be appreciate ............. Regards Robert Ouzen Confidentiality Notice follows: The information in this message (and the documents attached to it, if any) is confidential and may be legally privileged. It is intended solely for the addressee. Access to this message by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken, or omitted to be taken in reliance on it is prohibited and may be unlawful. If you have received this message in error, please delete all electronic copies of this message (and the documents attached to it, if any), destroy any hard copies you may have created and notify me immediately by replying to this email. Thank you.
