By default it puts the data back in the same POOL as the destroyed volume. So the volume it selects for output will depend on your definition for that storage pool. If the storage pool is collocated it may spread the data around; if not collocated, it should look for the FILLING volume in the pool with the most free space. The RESTORE VOLUME process does normally show the output volume; must have finished very fast if you didn't see it. Check the activity log, you might find the DISMOUNT message there.
-----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of RODOLFICH, NICHOLAS Sent: Wednesday, November 01, 2006 2:54 PM To: [email protected] Subject: restore volume question I discovered a damaged volume and ended up restoring the volume using the 'restore vol' command. The command reported that it marked the volume being restored as destroyed but it did not tell me which volume it would be restored to. The process didn't list it either. Does this generate a new volume or does it just spread the data around on other volumes. Thank you for your assistance!! Regards, Nicholas This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail.
