Kerry, I would start by examining the error report of the AIX box. Most likely the root cause will be found here and as a consequence, TSM could not be accessed any more. When you open a TSM Admin client and enter a TSM user (eg admin), this is still happening on the client/server where the TSM BA client is installed. Afterwards the TSM server is being contacted. Which fails since no TCP/IP connection could be established. best regards, Kurt
________________________________ Van: ADSM: Dist Stor Manager namens Kerry Campbell Verzonden: di 16/01/2007 18:03 Aan: [email protected] Onderwerp: [ADSM-L] Architecture and Instability Questions Hello All, I have a couple of questions... 1) This weekend TSM 5.3.2 on our AIX server became 'unstable', in that it would accept a userid but then just 'hang' and not give a prompt for a password. Some short time later, we were not even able to telnet into the AIX box that the TSM server software resides on. We could ping the box but it is as if the TCP/IP services for AIX 5.3.2 had stopped. Has anyone else experienced any problems like this? 2) Is it common to put the TSM software on the main AIX box vs putting it on an LPAR of a SAN? Thanks for any help. Kerry *** CONFIDENTIALITY NOTICE*** This message and any included attachments are from MedSynergies, Inc. and are intended only for the addressee. The contents in this message contain confidential information belonging to the sender that is legally protected. Unauthorized forwarding, printing, copying, distribution, or use of such information is strictly prohibited and may be unlawful. If you are not the addressee, please promptly delete this message and notify the sender of the delivery error by e-mail or contact MedSynergies, Inc. at [EMAIL PROTECTED] *** Disclaimer *** Vlaamse Radio- en Televisieomroep Auguste Reyerslaan 52, 1043 Brussel nv van publiek recht BTW BE 0244.142.664 RPR Brussel http://www.vrt.be/disclaimer
