BACKGROUND Equipment: IBM P-Series AIX 5.2 server running TSM 5.3, EMC Celerra DART 5.5.24-2. I would like to use the Client on the TSM server to do backups/restores via the GUI. I have read the IBM Redbook (Using the IBM Storage N Series with IBM Tivoli Storage Manager SG24-7243-00) on NDMP and it is not clear on how to manage a NAS backup via the GUI. Chapter 3 Configuring IBM Tivoli Storage Manager goes into how to configureTSM via the GUI Wizard, tape drive and NAS to work together; no mention of granting authority unless this is done behind the scenes. On Page 32 it is detailed on how to set the above up using the CLI. Page 37 you must grant authority for the TSM server over the NAS box. This is the process we used.
Chapter 4 Backup and Restoring Data On Page 42 you must grant authority system for TSM client. This will change the authority from TSM Admin and NAS Data Mover to System but the above CLI step explicitly told me I needed to do this. PROBLEM When I start up the TSM GUI Client I do not see the NAS box. I have confirmed that the NAS box can be seen via the dsmc client on the TSM server. I have tried this before/after granting the additional authority that is mentioned in Chapter 4. What are the correct steps for the TSM client to be able to backup/restore the NAS box via the GUI? Thanks in advance.
