Backgroud: TSM - 5.3.2.2 AIX -5.3.3 Library - ADIC I2000 Scalar,with IBM LTO2 drives, LTO2 fuji tapes
Currently have a partitioned library: 1st partition - 16 drives 2nd partition -2 drives We are eliminating the 2nd partition and moving the 2 drives and 50 slots from the 2nd partition over to the 1st partition to equal 18 drives with the help of the library vendor. I am fuzzy on the last steps regarding checking all the tapes back into the 1st library to recognize the newly added slots. So, once I run the rebuild script that rebuilds the library,library path, drives, and paths. Final Steps: Checking in all the tapes >show slots <library name> (to see additional slots) then >checkin libv <lib name> search=yes checklabel=barcode status=scratch >checkin libv <lib name> search=yes checklabel=barcode status=private then run an audit library<lib name> checklabel=barcode Are these the correct steps when checking in all the tapes to recognize the library and slots? Thank You. Nancy Backhaus Enterprise Systems HealthNow, NY 716-887-7979 CONFIDENTIALITY NOTICE: This email message and any attachments are for the sole use of the intended recipient(s) and may contain proprietary, confidential, trade secret or privileged information. Any unauthorized review, use, disclosure or distribution is prohibited and may be a violation of law. If you are not the intended recipient or a person responsible for delivering this message to an intended recipient, please contact the sender by reply email and destroy all copies of the original message.
