Hello, I did it with file on the disk, and it much more simple.
Hana -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Gill, Geoffrey L. Sent: Thursday, June 28, 2007 3:11 AM To: [email protected] Subject: [ADSM-L] unloaddb/loaddb I'm trying to reduce the assigned capacity of the DB since it is only 18% utilized but it looks like I've hit a roadblock. I'm thinking I need to run the uloaddb and loaddb to fix this but not totally sure. If so, as I read it, it sounds like the library needs to be changed to manual in order for this command to work when going to tape. It also sounds like other commands should be run after it and before the loaddb is run. Anyone out there with a 3494 out there that has done this and can send what commands and order you've run? I have an old server I'd like to test this on to see how long it would take to run on a db sized at about 73GB that is only 18% utilized. I'd call support but at 5.2 would be told to upgrade the system. Thanks, Geoff Gill TSM Administrator PeopleSoft Sr. Systems Administrator SAIC M/S-G1b (858)826-4062 Email: [EMAIL PROTECTED]
