Nicholas Rodolfich wrote: > > I need to use one of the drives in the TSM library to create a TAR > image and send to a vendor. Can I use the drives in the library without > hosing up the TSM drive paths for regular AIX commands.
Yes, you can do this. Be sure you don't stomp on any tapes TSM thinks it owns when you write your TAR file, though. > Do I take the drive and/or path offline? Dismount any tape TSM may have mounted in the drive you intend to use using "dismount volume VOLSER". Then take the drive offline using "update drive LIBNAME DRIVENAME online=no". When you're done using the drive outside of TSM, put the drive back online with the same command, but "online=yes". > How do I load/unload the tape? This depends on the type of library. An example for mounting on a 3494 (on AIX, as you indicated): mtlib -l /dev/lmcp0 -f /dev/rmt0 -m -V VOLSER Replace "-m" with "-d" to dismount. Note the volume has to be loaded into the library and have a barcode with the VOLSER (or be inserted as an unlabeled volume on a 3494). Other libraries may require different utilities or require knowing element numbers (tapeutil can do at least some of this). -- Hello World. David Bronder - Systems Admin Segmentation Fault ITS-SPA, Univ. of Iowa Core dumped, disk trashed, quota filled, soda warm. [EMAIL PROTECTED]
