Hi Bob, Running 5.3.0 TSM on P570 AIX level 5.3.4 with a TS3310 Library with expansion slots over FC. Have an EMC SAN connection for disk allocation. DISKPOOLS sit on the EMC.
I have not done a dump/load and was nit instructed by IBM to do the audit. Only exception reported by the audit, was an "extended parameter 8 not supported" and that was fixed by it. There was inconsistency reported that COULD NOT be fixed. Missing links in the diskpool not found. Required the volume to be restored which I did not attempt. Could the AUDITDB have messed things up. Server now crashing after starting. An expire inventory seems to have crashed 50% through the process and now the sever keeps core dumping when I try start TSM. I have now logged a call with IB in South Africa. Regards Adrian Compton IT Baan Operation/ Group IBM Tivoli Admin Aspen Pharmacare Port Elizabeth 7 Fairclough Road, Korsten, Port Elizabeth, 6020 PO Box 4002, Korsten, 6014 Tel: +27 (0) 41 407 2855 Fax: +27 (0) 41 453 7452 Cell: 082 320 4495 Email : [EMAIL PROTECTED] This email is solely for the named addressee. Any unauthorised use or interception of this email, or the review, retransmission, dissemination or other use of, or taking of any action in reliance upon the contents of this email, by persons or entities other than the intended recipient, is prohibited. If you are not the named addressee please notify us immediately by way of a reply e-mail, and also delete this email and any attached files. Disclaimer: You must scan this email and any attached files for viruses and/or any other defects. Pharmacare Limited accepts no liability for any loss, damages or consequence, whether direct, indirect, consequential or economic, however caused, and whether by negligence or otherwise, which may result directly or indirectly from this communication or of any attached files. -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Bob Booth Sent: 08 September 2007 16:40 PM To: [email protected] Subject: Re: [ADSM-L] Server Error On Sat, Sep 08, 2007 at 02:05:53PM +0200, adrian_compton wrote: > Hi, > > > > > > > > Has anyone experienced this error before. I have ran a dsmserv auditdb > > fix=yes logmode=normal, but still have the server core dumping now and > > then Please give us more information about your server, such as platform, level, attachments, etc. Where you instructed to perform the audit by IBM support? Where you having these same problems before you performed the audit? Did you also do a dumpdb/loaddb before the audit? Did the audit call out any problems? There may be something in activity log just before the abort, that may lead you to what operation is causing the problems, and you can also turn on contextmessaging 'SET CONTEXTMESSAGING' on the server to get more info. Most internal errors are due to database corruption, in some cases IBM support can help you do some surgery to fix the problems, or tell you to perform a dump/load/audit. Since you did the audit, there may have been something that the audit did not fix, or something has caused the corruption to come back. bob > 09/07/2007 16:21:45 ANR7838S Server operation terminated. > 09/07/2007 16:21:45 ANR7837S Internal error TBUTIL010 detected. > 09/07/2007 16:21:45 ANR7833S Server thread 1 terminated in response to > program abort. > 09/07/2007 16:21:45 ANR7833S Server thread 2 terminated in response to > program abort. > <snip>
