Hi All, I am trying to configure TSM on windows 2003 64 bit client with SP1 but having some serious issues. Where ever the disks are failed over, I am not able to start even the base tsm client (command line or GUI). When I reboot the box, all the disks are failed over to the other server and tsm client on rebooted server works normally.
Would appreciate your feedbacks.. Kind regards, Dinesh Pahari -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of John Monahan Sent: Wednesday, 28 November 2007 9:37 AM To: [email protected] Subject: Re: [ADSM-L] ANR8833E - Does 5.4.3 = 5.5 ? "ADSM: Dist Stor Manager" <[email protected]> wrote on 11/27/2007 01:43:41 PM: > We have been having an intermittant problem with ANR8833E errors, > which are addressed in apar: IC54107: TSM ANR8833E DURING CHECKIN > LIBVOL FOR SOME VOLUMES. > > However, the apar says: projected to be fixed in level 5.3.6.1, 5.3.7, and > 5.4.3. > > Since I haven't seen anything higher than 5.4.1.2 and 5.5 server is out, > can I assume the problem is fixed in 5.5 ? Is there a 5.4.2/5.4.3 > release expected ? APARs fixed in 5.5 are listed here: http://www-1.ibm.com/support/docview.wss?uid=swg21288273 IC54107 is not on the list. ______________________________ John Monahan Consultant Logicalis, Inc. 5500 Wayzata Blvd Suite 315 Golden Valley, MN 55416 Office: 763-417-0552 x109 Mobile: 952-221-6938 Fax: 763-417-0554 [EMAIL PROTECTED] http://www.us.logicalis.com This email may contain confidential information. If you received it in error, please delete it and notify the sender.
