This has the feeling of a hardware problem OR scsi interface/drivers/firmware which are not compatible.
Is that combination of hardware/firmware/driver code supported /up_to_date I would check on the latest firmware for the library. James Drozynski IBM Pittsburgh Lab 11 Stanwix Street Pittsburgh Pa. 15222 Tel:412-667-4421 Fax:412-667-6975 Tie:989-4421 "Llano, Martin" <[EMAIL PROTECTED]> Sent by: "ADSM: Dist Stor Manager" <ADSM-L@VM.MARIST.EDU> 02/04/2008 01:36 PM Please respond to "ADSM: Dist Stor Manager" <ADSM-L@VM.MARIST.EDU> To ADSM-L@VM.MARIST.EDU cc Subject [ADSM-L] Error when define library path IBM 3576 I have some problems when I want to define library path with a libraty IBM 3576, with Windows 2003 Server and TSM Server 5.3.5.2. Tsm log error: ANR8300E I/O error on library IBM_3576 (OP=8401C08C, CC=210, KEY=FF, ASC=FF, ASCQ=FF, SENSE=**NONE**, Description=The device was reset due to device power-up, SCSI bus reset, or manual tape load/eject). Refer to Appendix D in the 'Messages' manual for recommended action. (SESSION: 436) I didn't find any suggestion in Web Somebody can help me ?? Regards Martin A. Llano | EDS South HUB | BUR & Storage Services | Office: +54.11.5550.2604 | Buenos Aires, Argentina