Hi Avy, > For any future upgrade of TSM client 5.5, I will avoid > putting 5.5 on a window 2003 box with DB2 on it.
Well, at least not until we have a fix... don't write it off forever! :-) Best regards, Andy Andy Raibeck IBM Software Group Tivoli Storage Manager Client Product Development Level 3 Team Lead Internal Notes e-mail: Andrew Raibeck/Tucson/[EMAIL PROTECTED] Internet e-mail: [EMAIL PROTECTED] IBM Tivoli Storage Manager support web page: http://www.ibm.com/software/sysmgmt/products/support/IBMTivoliStorageManager.html The only dumb question is the one that goes unasked. The command line is your friend. "Good enough" is the enemy of excellence. "ADSM: Dist Stor Manager" <[email protected]> wrote on 05/05/2008 10:37:35 AM: > Hi Andrew, > I have uninstalled TSM client 5.5 and reinstalled a lower version > 5.4.2 and the DB2 worked wonderfully. I don't want to take a chance to deal > with the Apar issues, especially I don't have time to troubleshoot on a > production box. For any future upgrade of TSM client 5.5, I will avoid > putting 5.5 on a window 2003 box with DB2 on it. Thanks again. > > Avy Wong > Business Continuity Administrator > Mohegan Sun > 1 Mohegan Sun Blvd > Uncasville, CT 06382 > (860)862-8164 > (cell) (860)961-6976 > > > > > Andrew Raibeck > <[EMAIL PROTECTED] > OM> To > Sent by: "ADSM: [email protected] > Dist Stor cc > Manager" > <[EMAIL PROTECTED] Subject > .EDU> Re: [ADSM-L] upgrade TSM 5.5 client > causes the content of API folder > disappear? > 05/03/2008 07:22 > PM > > > Please respond to > "ADSM: Dist Stor > Manager" > <[EMAIL PROTECTED] > .EDU> > > > > > > > Hi Avy, > > My bigger concern is the APAR I cited... once you have resolved the rc 610 > issue, you will run into that APAR, which will not make you happy. Hence > my recommendation to stay with 5.4.2 if possible. > > I see you are not too far from my old stomping grounds, Colchester, CT. > :-) > > Best regards, > > Andy > > Andy Raibeck > IBM Software Group > Tivoli Storage Manager Client Product Development > Level 3 Team Lead > Internal Notes e-mail: Andrew Raibeck/Tucson/[EMAIL PROTECTED] > Internet e-mail: [EMAIL PROTECTED] > > IBM Tivoli Storage Manager support web page: > http://www.ibm. > com/software/sysmgmt/products/support/IBMTivoliStorageManager.html > > > The only dumb question is the one that goes unasked. > The command line is your friend. > "Good enough" is the enemy of excellence. > > "ADSM: Dist Stor Manager" <[email protected]> wrote on 2008-05-03 > 07:27:42: > > > Andrew, > > Yes, I am currently working with IBM Support Erich Schnappauf to > try > > to resolve this. His said that a simple reboot to restart the DB2 will > > solve the problem, but my dba does not think so. > > We have an emergency reboot come monday at noon. If the emergency does > not > > work, we plan to uninstall 5,5 and reinstall 5.4.2. I will find out on > > Monday. Thanks. > > > > Avy Wong > > Business Continuity Administrator > > Mohegan Sun > > 1 Mohegan Sun Blvd > > Uncasville, CT 06382 > > (860)862-8164 > > (cell) (860)961-6976 > > > > > > > > > > Andrew Raibeck > > <[EMAIL PROTECTED] > > OM> To > > Sent by: "ADSM: [email protected] > > Dist Stor cc > > Manager" > > <[EMAIL PROTECTED] Subject > > .EDU> Re: [ADSM-L] upgrade TSM 5.5 > client > > causes the content of API folder > > disappear? > > 05/02/2008 10:25 > > PM > > > > > > Please respond to > > "ADSM: Dist Stor > > Manager" > > <[EMAIL PROTECTED] > > .EDU> > > > > > > > > > > > > > > The return code 610 says that the message catalog (dscenu.txt) cannot be > > found. I suspect you have the DSMI_DIR environment variable configured > to > > point to the old location, so that is why the problem occurs. > > > > HAVING SAID THAT, you should be aware of a new APAR that was just > opened, > > IC56403 (text below). As the APAR text says, it can theoretically any > API > > application, but so far we have only seen it with DB2 on Windows. > > > > I strongly recommend using the 5.4.2 API for the time being unless you > > must remain at 5.5 for some reason. If you must remain at 5.5, you > should > > open a PMR with IBM, cite this APAR, and ask for a workaround. > > > > Best regards, > > > > Andy > > > > --------------------------- > > TSM API 5.5 ENHANCEMENTS CAN RESULT IN STACK OVERFLOW > > Due to the introduction of enhancements at the TSM 5.5 client > > code level, the stack requirements for the API increased. On > > certain platforms, invocation of the API when the available > > stack is constrained can result in a stack overflow and prevent > > loading of the TSM API. This problem has been observed most > > commonly with DB2 in the Windows environment but it may occur on > > other platforms and with other software that uses the TSM API. > > From within DB2, the following may be observed in the > > db2diag.log: > > > > 2008-04-09-09.47.32.843000-240 I268081860H332 LEVEL: Error > > PID : 2568 TID : 3956 PROC : db2syscs.exe > > INSTANCE: DB2 NODE : 000 > > FUNCTION: DB2 UDB, data protection, sqlpInitVendorDevice, > > probe:1050 > > RETCODE : ZRC=0x0000001E=30 > > DIA8030C Invalid filename "" was specified. > > 2008-04-18-11.37.55.235000-360 I12276H379 LEVEL: Error > > PID : 232 TID : 3788 PROC : > > db2syscs.exe > > INSTANCE: DB2 NODE : 000 > > FUNCTION: DB2 UDB, data protection, sqlpgArchiveLogFile, > > probe:3160 > > MESSAGE : Failed to archive log file S0000000.LOG to TSM chain > > 0 from > > D:\DB2\NODE0000\SQL00001\SQLOGDIR\ with rc = 30 > > SQL2079N with rc='30' > > > > Additional Keywords: overflow rc=30 db2 SQL2079N SQL1224N TSMERP > > mysap r3 win32 win64 > > --------------------------- > > > > Andy Raibeck > > IBM Software Group > > Tivoli Storage Manager Client Product Development > > Level 3 Team Lead > > Internal Notes e-mail: Andrew Raibeck/Tucson/[EMAIL PROTECTED] > > Internet e-mail: [EMAIL PROTECTED] > > > > IBM Tivoli Storage Manager support web page: > > http://www.ibm. > > com/software/sysmgmt/products/support/IBMTivoliStorageManager.html > > > > > > > > The only dumb question is the one that goes unasked. > > The command line is your friend. > > "Good enough" is the enemy of excellence. > > > > "ADSM: Dist Stor Manager" <[email protected]> wrote on 05/01/2008 > > 03:40:47 PM: > > > > > Hello, > > > When upgrading TSM client to 5.5.0.4 causes the content of API > > folder > > > to disappear. This is a window 2003 standard edition. TDP is DB2. > > > The upgrade is the typical install, but causes the DB2 have exit > error. > > > > > > The problem we are seeing when we upgrade the TSM 5.5.0.4 client from > > > 5.3.4.4 is that the new API does not work with the DB2 user exit > > program. > > > It functions well with the 5.3.4.4 client. Once the upgrade completes > > we > > > start seeing the following errors when issuing the commands below: > > > > > > c:\> db2adutil query full > > > Initialize environment failed to ADSM return code 610. > > > > > > c:\> db2 backup database toolsdb use tsm > > > SQL2062N An error occurred while accessing media > > > "C:\program files\IBM\sqllib\bin\db2tsm.dll". Reason code "610" > > > > > > I was told that I do not have to upgrade the TDP piece at the same > time. > > > How do you resolve this problem? I noticed the all the stuff inside > the > > API > > > folder disappear. All that is left is dsm file. I do not see BIN, DLL, > > > icc32, INCLUDE, LIB, OBJ, SAMPRUN, SAmPSRC, apienu.dll, descenu.txt, > > > descenu.txt.bak2, dsierror.log, dsm.opt, dsmerror.log > > > > > > Any idea? > > > > > > I appreciate your help. > > > > > > Avy Wong > > > Business Continuity Administrator > > > Mohegan Sun > > > 1 Mohegan Sun Blvd > > > Uncasville, CT 06382 > > > (860)862-8164 > > > (cell) (860)961-6976
