On Thu, Aug 7, 2008 at 2:50 PM, Richard van Denzel <[EMAIL PROTECTED]> wrote: > What kind of storage is the FILECLASS on and how is it connected to the > server (SCSI, SAS, FC)? I also know a case where latency might be an > issue on a lightpath FC of 30km.
The storage is a FC-attached EMC CX700 to a W2K3 SP2 HP w/ Emulex HBAs. But we're not nearly 30km, more like 1, and the speed is not bad when it's working (30MB/s). Thanks, Richard! Steve > > Met vriendelijke groet, with kind regards, > > Richard van Denzel. > > -----Original Message----- > From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of > Steve Stackwick > Sent: 07 August 2008 20:47 > To: [email protected] > Subject: Re: [ADSM-L] ANR8503E > > On Thu, Aug 7, 2008 at 2:36 PM, Richard van Denzel <[EMAIL PROTECTED]> > wrote: >> You've checked the actlog around the time the error occurred? > > Nuthin but the ANR8503E and the message that the volume is being set > to readonly. >> >> You're sure that the volume was not full and no more scratch volumes >> could be assigned (maxscratch)? > > Actually, some of the volumes were empty, others were filling. > > You also checked that the Windows volume >> had sufficient space for the volume (initially only the space for the >> data in the volume is assigned and the volume will grow as data is >> assigned to the volume)? > > Not sure what you mean, exactly, but probably I wasn't clear in the > OP. These are predefined FILE class volumes of 200GB. > > An addtional note that just occurred to me, though. We've had this > problem periodically, a volume every month or so. No biggie, we just > changed it back to READWRITE and moved on. Now we've moved the server > and shares a half-mile farther apart (as the crow flies-- as the wire > crawls may be considerably farther), so latency must have something to > do with this issue. > > Thanks for the reply! > >> >> Met vriendelijke groet, with kind regards, >> >> Richard van Denzel. >> -----Original Message----- >> From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf > Of >> Steve Stackwick >> Sent: 07 August 2008 19:41 >> To: [email protected] >> Subject: [ADSM-L] ANR8503E >> >> Anyone else seeing: >> >> ANR8503E A failure occurred in writing to volume >> >> when writing to a FILE class storage pool volume defined on a Windows >> share? This is TSM 5.5, Windows 2003 SP2 on both the sharing system >> and the TSM server. Strangely enough, there are no entries in either >> the sharing system's event log or the TSM server's event log. The >> volume is changed to readonly by TSM after the error, and the writing >> process (MOVE DATA) dies. >> >> I found a reference to someone else having this problem about a year >> ago, but I never saw an answer. Maybe more people have inflicted this >> pain on themselves by now? >> >> We opened a ticket w/ MS, but w/o any eventlog entries, they seem a >> little dubious. >> >> Steve >> >> -- >> Stephen Stackwick >> Jacob & Sundstrom, Inc. >> 401 East Pratt St., Suite 2214 >> Baltimore, MD 21202-3003 >> (410) 539-1135 * (866) 539-1135 >> [EMAIL PROTECTED] >> > > > > -- > Stephen Stackwick > Jacob & Sundstrom, Inc. > 401 East Pratt St., Suite 2214 > Baltimore, MD 21202-3003 > (410) 539-1135 * (866) 539-1135 > [EMAIL PROTECTED] > -- Stephen Stackwick Jacob & Sundstrom, Inc. 401 East Pratt St., Suite 2214 Baltimore, MD 21202-3003 (410) 539-1135 * (866) 539-1135 [EMAIL PROTECTED]
