Thanks Kelly, Not sure about anyone else's Outlook client but mine thoroughly hosed up those three commands to look like:
"audit library libname checklabel=barcode checkin libvol libname search=yes checklabel=barcode status=scratch checkin libvol libname search=yes checklabel=barcode status=private" So here they are spread out: audit library libname checklabel=barcode checkin libvol libname search=yes checklabel=barcode status=scratch checkin libvol libname search=yes checklabel=barcode status=private See Ya' Howard > -----Original Message----- > From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf > Of Kelly Lipp > Sent: Wednesday, September 03, 2008 4:00 PM > To: [email protected] > Subject: Re: [ADSM-L] Incorrect volume being mounted for reclamation > > Howard is right on. I'd add a couple more commands to his audit to > "synchronize" the library completely: > > Tsm> audit library libname checklabel=barcode > Tsm> checkin libvol libname search=yes checklabel=barcode > status=scratch > Tsm> checkin libvol libname search=yes checklabel=barcode > status=private > > These three command will ensure that your library inventory is accurate > and that all tapes in the library are checked in properly. The audit > library command will check tapes out that are not found. For instance, > if TSM thinks that tape 100087 is in the library, but the audit > determines that it isn't, it will be removed from the TSM library > inventory. However, if the audit finds tape 100088 that TSM doesn't > think is in the library, it won't automatically check it in. The two > checkin libvol commands fix that up as well. Note the order: you want > to do the scratch tapes first. > > Thanks, > > Kelly Lipp > CTO > STORServer, Inc. > 485-B Elkton Drive > Colorado Springs, CO 80907 > 719-266-8777 > www.storserver.com > > > -----Original Message----- > From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf > Of > Howard Coles > Sent: Wednesday, September 03, 2008 2:54 PM > To: [email protected] > Subject: Re: [ADSM-L] Incorrect volume being mounted for reclaimation > > Stop all processes, unmount all tapes and audit the library. > > It looks like TSM thinks tape 100562 is in the slot currently occupied > by 100617 instead. > > Either the paths are wrong for the drives, (which I doubt) or the > library's inventory is a little off. > > To verify, do a q libv, determine which slot TSM "thinks" the tape is > in, and then open up your library and see if they match. You may have > to actually take the tape out, and then back in again. > > I would try the audit first, then check TSM's list-o-tapes. IF the > tape > your needing doesn't show up there may be other problems. Such as tape > stuck in picker, not in library at all (mistakenly sent offsite), etc. > > See Ya' > Howard > > > > -----Original Message----- > > From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf > > Of Timothy Hughes > > Sent: Wednesday, September 03, 2008 3:48 PM > > To: [email protected] > > Subject: [ADSM-L] Incorrect volume being mounted for reclaimation > > > > Hello all, > > > > I'm reaching at for any help on this. > > > > <>We have a tape that needs to be reclaimed but it keeps being set to > > "unavailable" during reclamation. > > > > > > When I update the tape by doing the following using the GUI > > > > ANR2017I Administrator xxxxx issued command: UPDATE > > > > VOLUME 100562 ACCESS=READWRITE > > WHERESTGPOOL=LTOPOOL > > > > WHEREDEVCLASS=LTOCLASS (SESSION: 138535) > > > > <> > > > > It changes back to available, however as soon as reclamation calls > for > > the tape it changes back to "unavailable" The TSM Server log with > > messages are below can anyone give me suggestions/help on the best > way > > to correct the issue? > > > > Thanks for any help in advance! > > > > > > ANR2017I Administrator xxxxx issued command: UPDATE > > > > VOLUME 100562 ACCESS=READWRITE > > WHERESTGPOOL=LTOPOOL > > > > WHEREDEVCLASS=LTOCLASS (SESSION: 138535) > > > > 09/03/08 07:37:40 ANR2207I Volume 100562 updated. (SESSION: > 138535) > > > > 09/03/08 09:00:00 ANR1044I Removable volume 100562 is required > for > > space > > > > reclamation. (PROCESS: 946) > > > > 09/03/08 09:00:36 ANR8356E Incorrect volume 100617 was mounted > > instead of > > > > volume 100562 in library LTO_LIB. (PROCESS: > 947) > > > > 09/03/08 09:01:01 ANR8381E LTO volume 100562 could not be mounted > > in drive > > > > RMT3 (/dev/rmt3). (PROCESS: 947) > > > > 09/03/08 09:01:01 ANR1402W Mount request denied for volume 100562 > - > > volume > > > > unavailable. (PROCESS: 947) > > > > 09/03/08 09:01:01 ANR1410W Access mode for volume 100562 now set > to > > > > "unavailable". (PROCESS: 947) > > > > 09/03/08 09:25:50 ANR1420W Read access denied for volume 100562 - > > volume > > > > access mode = "unavailable". (PROCESS: 946) > > > > <> 09/03/08 13:00:38 ANR2017I Administrator XXXXX issued > > command: UPDATE > > > > VOLUME 100562 ACCESS=READWRITE > > WHERESTGPOOL=LTOPOOL > > > > WHEREDEVCLASS=LTOCLASS (SESSION: 143639) > > > > 09/03/08 13:00:38 ANR2207I Volume 100562 updated. (SESSION: > 143639) > > > > 09/03/08 13:42:54 ANR1044I Removable volume 100562 is required > for > > space > > > > reclamation. (PROCESS: 961) > > > > 09/03/08 14:08:30 ANR8356E Incorrect volume 100617 was mounted > > instead of > > > > volume 100562 in library LTO_LIB. (PROCESS: > 961) > > > > 09/03/08 14:08:55 ANR8381E LTO volume 100562 could not be mounted > > in drive > > > > RMT4 (/dev/rmt10). (PROCESS: 961) > > > > reclamation. (PROCESS: 965) > > > > 09/03/08 14:10:12 ANR1420W Read access denied for volume 100617 - > > volume > > > > access mode = "unavailable". (PROCESS: 965) > > > > > > > > > > > > > > > > > > > > > > 09/03/08 13:42:54 ANR1044I Removable volume 100617 is required > for > > space > > > > reclamation. (PROCESS: 962) > > > > 09/03/08 13:42:54 ANR8312E Volume 100617 could not be located in > > library > > > > LTO_LIB. (PROCESS: 962) > > > > 09/03/08 13:42:54 ANR8381E LTO volume 100617 could not be mounted > > in drive > > > > RMT5 (/dev/rmt4). (PROCESS: 962) > > > > 09/03/08 13:42:59 ANR1402W Mount request denied for volume 100617 > - > > volume > > > > unavailable. (PROCESS: 962) > > > > 09/03/08 13:42:59 ANR1410W Access mode for volume 100617 now set > to > > > > "unavailable". (PROCESS: 962)
