It is difficult to determine your actual question. I presume you have an operation you are attempting to perform which is failing with the subject as an error message. Is the below a complete listing of all of your tape volumes? It appears that your off_site_pool is not being correctly managed... checkout libv without marking them offsite. "move drm" handles all such operations for you, keeping it all in order. But, that's probably not the issue. Do you have space to check some scratch volumes into your library? My guess is that you do not yet know. Send us the output of show slots <libraryname> and please, do it tab-delimited so we don't have to play "splice the line". Please also send a "q libv f=d", same format. Between the two, we can see what's in the library and what CAN be in the library. Before you do the two commands, please wait until no tapes are in use, dismount volume on any that are sitting idle. disa ses and run an aud libr <libraryname> checklabel=barcode So we can now that TSM knows correctly what is there. Run the show slots and q libv right afterward while the library's still quiesced, then ena ses. There is no importance in running the q libv while quiesced, but it takes no time to do it, and it IS important to show slots while the library's not doing anything, and you get nicer results if nothing's mounted, too. If you are not allowed to disa ses, and you get "Library <libraryname> is busy.", keep trying until you DO get a run without that message, or we can't see the slots. We still get the slot count, but it'd be nicer to have the details, just in case. Also send q devc q stg Then we can start to figure out what owns what volume, where they all are, and what we can do about it. With good luck, you have a well-designed but neglected system, and we'll find that you just need to have the operations people stick some tapes in your I/O door and you can check them in as scratch. There's another type of luck, however...
If you like, just send those queries directly to me, to avoid cluttering the list with potentially thousands of lines of queries. cd -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of David Lopes Sent: Monday, September 08, 2008 4:50 PM To: [email protected] Subject: [ADSM-L] There are not enough scratch volumes available The information about the volumes its: Can you help me to say me witch one I can change? TAPE STGPOOL STATUS ACCESS %RECL %UTIL LOCATION --------- --------------- --------- --------- ----- ----- ------------ 182ACAL4 OFF_SITE_POOL FULL OFFSITE 1 98 COFRE 184ACAL4 OFF_SITE_POOL FULL OFFSITE 35 64 COFRE 192ACAL4 OFF_SITE_POOL FULL OFFSITE 49 50 COFRE 295ACAL4 OFF_SITE_POOL FULL OFFSITE 52 47 COFRE 298ACAL4 OFF_SITE_POOL FILLING READWRITE 0 52 299ACAL4 OFF_SITE_POOL FULL UNAVAILAB 75 24 180ACAL4 ON_SITE_POOL FILLING READONLY 0 18 261ACAL4 ON_SITE_POOL FILLING READONLY 0 0 190ACAL4 ON_SITE_POOL FILLING READWRITE 0 71 191ACAL4 ON_SITE_POOL FULL READWRITE 0 99 263ACAL4 ON_SITE_POOL FULL READWRITE 50 49 297ACAL4 ON_SITE_POOL FULL READWRITE 34 65 305ACAL4 ON_SITE_POOL FULL READWRITE 0 99 183ACAL4 ON_SITE_POOL FILLING UNAVAILAB 38 36 264ACAL4 ON_SITE_POOL FILLING UNAVAILAB 0 0 TAPE TYPE DATE LOCATION -------- ------------ ------------------ ------------------ 296ACAL4 DBSNAPSHOT 2008-09-01 09:07:28.000000 193ACAL4 BACKUPFULL 2008-09-02 09:00:18.000000 ANR1462I RUN: Command script VER_TAPES completed successfully. tsm: TSMSRV>run ver_tapes_a_entrar ANR2034E SELECT: No match found using this criteria. ANR1462I RUN: Command script VER_TAPES_A_ENTRAR completed successfully. tsm: TSMSRV>q volume 299ACAL4 f=d Volume Name: 299ACAL4 Storage Pool Name: OFF_SITE_POOL Device Class Name: DEVCL_LTO Estimated Capacity: 1.161.032,9 Scaled Capacity Applied: Pct Util: 24,8 Volume Status: Full Access: Unavailable Pct. Reclaimable Space: 75,2 Scratch Volume?: Yes In Error State?: No Number of Writable Sides: 1 Number of Times Mounted: 13 Write Pass Number: 1 Approx. Date Last Written: 05-07-08 09:13:55 Approx. Date Last Read: 23-06-08 10:00:26 Date Became Pending: Number of Write Errors: 0 Number of Read Errors: 0 Volume Location: Volume is MVS Lanfree Capable : No Last Update by (administrator): Last Update Date/Time: 23-06-08 09:58:25 Begin Reclaim Period: End Reclaim Period: Drive Encryption Key Manager: None tsm: TSMSRV>q volume 180ACAL4 f=d Volume Name: 180ACAL4 Storage Pool Name: ON_SITE_POOL Device Class Name: DEVCL_LTO Estimated Capacity: 1.600.000,0 Scaled Capacity Applied: Pct Util: 18,7 Volume Status: Filling Access: Read-Only Pct. Reclaimable Space: 0,5 Scratch Volume?: Yes In Error State?: Yes Number of Writable Sides: 1 Number of Times Mounted: 494 Write Pass Number: 1 Approx. Date Last Written: 14-08-08 16:42:10 Approx. Date Last Read: 15-08-08 09:03:53 Date Became Pending: Number of Write Errors: 1 Number of Read Errors: 0 Volume Location: Volume is MVS Lanfree Capable : No Last Update by (administrator): Last Update Date/Time: 09-08-08 20:31:00 Begin Reclaim Period: End Reclaim Period: Drive Encryption Key Manager: None tsm: TSMSRV>q volume 261ACAL4 f=d Volume Name: 261ACAL4 Storage Pool Name: ON_SITE_POOL Device Class Name: DEVCL_LTO Estimated Capacity: 1.600.000,0 Scaled Capacity Applied: Pct Util: 0,3 Volume Status: Filling Access: Read-Only Pct. Reclaimable Space: 0,0 Scratch Volume?: Yes In Error State?: Yes Number of Writable Sides: 1 Number of Times Mounted: 252 Write Pass Number: 1 Approx. Date Last Written: 25-07-08 21:01:46 Approx. Date Last Read: 02-08-08 14:48:03 Date Became Pending: Number of Write Errors: 1 Number of Read Errors: 0 Volume Location: Volume is MVS Lanfree Capable : No Last Update by (administrator): Last Update Date/Time: 10-07-08 15:59:25 Begin Reclaim Period: End Reclaim Period: Drive Encryption Key Manager: None tsm: TSMSRV>q volume 183ACAL4 f=d Volume Name: 183ACAL4 Storage Pool Name: ON_SITE_POOL Device Class Name: DEVCL_LTO Estimated Capacity: 1.600.000,0 Scaled Capacity Applied: Pct Util: 36,8 Volume Status: Filling Access: Unavailable Pct. Reclaimable Space: 38,0 Scratch Volume?: Yes In Error State?: No Number of Writable Sides: 1 Number of Times Mounted: 5.339 Write Pass Number: 1 Approx. Date Last Written: 21-07-08 22:26:42 Approx. Date Last Read: 21-07-08 09:01:21 Date Became Pending: Number of Write Errors: 0 Number of Read Errors: 0 Volume Location: Volume is MVS Lanfree Capable : No Last Update by (administrator): Last Update Date/Time: 13-05-08 07:02:24 Begin Reclaim Period: End Reclaim Period: Drive Encryption Key Manager: None tsm: TSMSRV>q volume 264ACAL4 f=d Volume Name: 264ACAL4 Storage Pool Name: ON_SITE_POOL Device Class Name: DEVCL_LTO Estimated Capacity: 1.600.000,0 Scaled Capacity Applied: Pct Util: 0,5 Volume Status: Filling Access: Unavailable Pct. Reclaimable Space: 0,0 Scratch Volume?: Yes In Error State?: No Number of Writable Sides: 1 Number of Times Mounted: 1.486 Write Pass Number: 1 Approx. Date Last Written: 14-08-08 18:01:36 Approx. Date Last Read: 10-08-08 10:38:13 Date Became Pending: Number of Write Errors: 0 Number of Read Errors: 0 Volume Location: Volume is MVS Lanfree Capable : No Last Update by (administrator): Last Update Date/Time: 25-07-08 23:24:24 Begin Reclaim Period: End Reclaim Period: Drive Encryption Key Manager: None tsm: TSMSRV> _________________________________ Well, you have two volumes in 'read-only' state and three in 'unavailable' state. If you expect them to be used and written to, make them read-write (READW) status. If they then return to their previous state, you need to find out why. A 'q volume <volid> f=d' command will tell you if there are read or write errors on these volumes. Jeff White > My tsm its send me a email with error message: > There are not enough scratch volumes available. Condition (0 < 5) > Recommendation: Check in some scratch tapes. > > The number of unavailable volumes is too high Condition (3 > 2) > Recommendation: Issue: Q LIBVOL F=D at a TSM command prompt for > details. > > ________________________________________________________________ > > > TAPE STGPOOL STATUS ACCESS %RECL > %UTIL LOCATION > --------- --------------- --------- --------- ----- > ----- ------------ > 182ACAL4 OFF_SITE_POOL FULL OFFSITE 1 > 98 COFRE > 184ACAL4 OFF_SITE_POOL FULL OFFSITE 35 > 64 COFRE > 192ACAL4 OFF_SITE_POOL FULL OFFSITE 49 > 50 COFRE > 295ACAL4 OFF_SITE_POOL FULL OFFSITE 52 > 47 COFRE > 298ACAL4 OFF_SITE_POOL FILLING READWRITE 0 > 52 > 299ACAL4 OFF_SITE_POOL FULL UNAVAILAB 75 > 24 > 180ACAL4 ON_SITE_POOL FILLING READONLY 0 > 18 > 261ACAL4 ON_SITE_POOL FILLING READONLY 0 > 0 > 190ACAL4 ON_SITE_POOL FILLING READWRITE 0 > 71 > 191ACAL4 ON_SITE_POOL FULL READWRITE 0 > 99 > 263ACAL4 ON_SITE_POOL FULL READWRITE 50 > 49 > 297ACAL4 ON_SITE_POOL FULL READWRITE 34 > 65 > 305ACAL4 ON_SITE_POOL FULL READWRITE 0 > 99 > 183ACAL4 ON_SITE_POOL FILLING UNAVAILAB 38 > 36 > 264ACAL4 ON_SITE_POOL FILLING UNAVAILAB 0 > 0 > > TAPE TYPE DATE LOCATION > -------- ------------ ------------------ ------------------ > 296ACAL4 DBSNAPSHOT 2008-09-01 > 09:07:28.000000 > 193ACAL4 BACKUPFULL 2008-09-02 > 09:00:18.000000 > > > What I have have to do to solve this problem? > > Thanks for your help > > David > > No virus found in this incoming message. Checked by AVG - http://www.avg.com Version: 8.0.169 / Virus Database: 270.6.18/1658 - Release Date: 08-09-2008 07:01
