You are going to run into problems just simply because of hardware platform changes. The 64bit RS/6000 platform uses a different endian than the 32/64bit Intel based platforms that you would normally run SUSE on.
Before you proceed make sure that you'll be able to access the data you have on tape!! See Ya' Howard > -----Original Message----- > From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf > Of Mark Stapleton > Sent: Wednesday, September 10, 2008 12:55 PM > To: [email protected] > Subject: Re: [ADSM-L] TSM 5.2.9: Migration from AIX to SuSE Linux > > Did the storage pool definitions come across, but not connectivity to > the pools themselves? > > -- > Mark Stapleton ([EMAIL PROTECTED]) > CDW Berbee > System engineer > 7145 Boone Avenue North, Suite 140 > Brooklyn Park MN 55428-1511 > 763-592-5963 > www.berbee.com > > > -----Original Message----- > > From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf > > Of Richard > > Sent: Wednesday, September 10, 2008 9:51 AM > > To: [email protected] > > Subject: [ADSM-L] TSM 5.2.9: Migration from AIX to SuSE Linux > > > > I did a full DB backup on my old AIX server. I tried to restore this > DB > > backup on Linux, but it doesn't work. IBM says this is not supported. > > They told me to do a server export / import. > > > > I setup a server to server export / import but I can't seem to get my > > storage pools and volhistory to come across. I get everything but > this > > information. > > > > Any help would be greatly appreciated. > > > > Thanks, > > Richard > > > > > +---------------------------------------------------------------------- > > |This was sent by [EMAIL PROTECTED] via Backup Central. > > |Forward SPAM to [EMAIL PROTECTED] > > > +----------------------------------------------------------------------
