Hi We run both. A ts3200 at a small site and 2 x ts3310 at 2 larger sites. The ts3200 requires manual intervention for ejecting tapes etc which is quite painful, but worth it for the smaller site.
I agree for Enterprise scalability to use the TS3310. It is an amazingly simple yet powerful library. We have a 9U expansion on it giving me 108 Tape Slots, 18 io slots and 4 drives. One thing to mention, you have to buy a licence to use 28 of the slots on the 9U expansion as they are locked. Rather look at all the options at time of purchase. AND max your drives as you will need them. Regards Adrian Compton Aspen Pharmacare Port Elizabeth tel: +2741 4072855 Fax: +2741 453 7452 Cell: +27823204495 Email: [EMAIL PROTECTED] -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Kelly Lipp Sent: 22 October 2008 02:58 AM To: [email protected] Subject: Re: [ADSM-L] IBM TS3310 vs IBM TS3200 The TS3200 can now have up to four HH LTO3 or LTO4 drives. The LTO4 are SAS drives. So pretty good throughput in a little space. On an interesting side note, the OEM version of that library will be stackable soon. I doubt that IBM will market it that way as it will conflict with the TS3310. Kelly Lipp CTO STORServer, Inc. 485-B Elkton Drive Colorado Springs, CO 80907 719-266-8777 www.storserver.com -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Wanda Prather Sent: Tuesday, October 21, 2008 6:42 PM To: [email protected] Subject: Re: [ADSM-L] IBM TS3310 vs IBM TS3200 I've got customers I've set up with both. Nothing wrong with either. Only buy the TS3200 if you are certain your environment will never require more than 2 drives, or more cartridge capacity; it's not expandable. The TS3310 is more robust and expandable to full rack height and many drives (I've gone through 3 customer expansions, it's very straightforward.) Base unit has 6 slots in the I/O door, TS3200 only 3. Drivers & setup for use with TSM is the same. It's all about your requirements. W On Tue, Oct 21, 2008 at 8:04 PM, Larry Peifer <[EMAIL PROTECTED]> wrote: > We are debating whether to purchase the IBM TS3310 or the TS3200 tape > library for use with our existing TSM environment. We are an AIX shop > running 4 Gig interfaces on a 4 Gig FC switch. This equipment will replace > our existing IBM 3583 tape library. Any first hand experience would be > appreciated. >
