You need to run q pr from the TSM interface to see processes. Jane.
-----Original Message----- From: ADSM: Dist Stor Manager [mailto:[email protected]] On Behalf Of ashish sharma Sent: 11 February 2009 16:02 To: [email protected] Subject: Re: [ADSM-L] cannot run command Hello, The o/p of command is as below: # /usr/sbin/lsdev -C -c tape -H name status location description rmt0 Available 1Z-08-00-0,0 Differential SCSI 4mm Tape Drive rmt1 Available 31-08-01 IBM 3580 Ultrium Tape Drive (FCP) smc0 Available 31-08-01 IBM 3584 Library Medium Changer (FCP) rmt2 Available 31-08-01 IBM 3580 Ultrium Tape Drive (FCP) rmt3 Available 2U-08-01 IBM 3580 Ultrium Tape Drive (FCP) rmt6 Available 2d-08-01 IBM 3580 Ultrium Tape Drive (FCP) rmt4 Available 2U-08-01 IBM 3580 Ultrium Tape Drive (FCP) rmt5 Available 2U-08-01 IBM 3580 Ultrium Tape Drive (FCP) rmt7 Available 2d-08-01 IBM 3580 Ultrium Tape Drive (FCP) smc1 Available 2d-08-01 IBM 3584 Library Medium Changer (FCP) rmt8 Available 2d-08-01 IBM 3580 Ultrium Tape Drive (FCP) rmt9 Available 2d-08-01 IBM 3580 Ultrium Tape Drive (FCP) rmt10 Available 2d-08-01 IBM 3580 Ultrium Tape Drive (FCP) while o/p of "q proc" does not show anything. Regards Ashish On 2/11/09, Kamran Rao <[email protected]> wrote: > > As root - run "lsdev -Cc tape" and see if your drives and medium changer > are showing up as "available" - if shows up as "defined" then you might > have a device problem. You have not mentioned what kind of library and > also if it is a direct connect as "scsi" or via FC adapter etc etc? > > > Regards, > > Kamran Rao > > -----Original Message----- > From: ADSM: Dist Stor Manager [mailto:[email protected]] On Behalf Of > ashish sharma > Sent: February 11, 2009 10:08 AM > To: [email protected] > Subject: [ADSM-L] cannot run command > > Hello all, > > My TSM server version is > > Storage Management Server for AIX-RS/6000 - Version 5, Release 3, Level > 5.0 on AIX. > > The issue i am facing is that when i try to give command like "q path" > or "q mount" the command hangs as shown below > > ************************* > tsm: TSMLM>q mount > > ************************* > > and does not give any o/p but when i give command like q session, it > works but again i am unable to cancel any session.Does anybody has any > idea why is it happening?I think restaring the server might solve the > problem but at present i am not in favour of it. > > > > > -- > Best Regards > Ashish Sharma > ST Microelectronics Ltd. > 919717003853 > -- Best Regards Ashish Sharma ST Microelectronics Ltd. 919717003853 Please check that this email is addressed to you. If not, you should delete it immediately as its contents may be confidential and its disclosure, copying or distribution unlawful. C. & J. Clark International Limited takes steps to prevent the transmission of electronic viruses but responsibility for screening incoming messages and the risk of such transmission lies with the recipient. C. & J. Clark International Limited Trading as Clarks Registered in England number 141015. Registered office 40 High Street, Street, Somerset. BA16 0EQ. England. This message has been scanned for viruses by BlackSpider MailControl - www.blackspider.com
