Thanks Richard, Del and Steve. We still haven't resolved the problem, and other priorities have taken precedence for the Exchange admins. We think at least part of our problem involves an isolated Exchange test environment trying to communicate with the TSM server on the production network.
Thanks again. Larry -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[email protected]] On Behalf Of Del Hoobler Sent: Wednesday, February 18, 2009 4:13 PM To: [email protected] Subject: Re: Help needed configuring TDP for Exchange2007 with VSS. This sounds very close to the: ANS1353E (RC53) Session rejected: Unknown or incorrect ID entered This problem can be caused if the register node was not done correctly. In order for proxy authority to work, you must have as admin node of "Client Owner" admin privilege for the DP/Exchange node. This is normally done for you automatically when you issue the REGISTER NODE command. However.... if you used something like: REGISTER NODE nodename password USERID=NONE or if you used the GUI to define the NODE, the "admin" id may not have been created. To check this... on your TSM Server, issue the "QUERY ADMIN " command. It should show something like this: tsm: SERVER>q admin Administrator Days Since Days Since Locked? Privilege Classes Name Last Access Password Set -------------- ------------ ------------ ---------- ----------------------- CTNHEXMB01A <1 134 No Client Owner CTNHEXMB02A <1 134 No Client Owner EXMB01E <1 134 No Client Owner If this is not the problem, the other thing to verify is that your CAD Service is configured and running. Thanks, Del ---------------------------------------------------- "ADSM: Dist Stor Manager" <[email protected]> wrote on 02/18/2009 02:39:10 PM: > [image removed] > > Help needed configuring TDP for Exchange2007 with VSS. > > Mcnutt, Larry E. > > to: > > ADSM-L > > 02/18/2009 02:41 PM > > Sent by: > > "ADSM: Dist Stor Manager" <[email protected]> > > Please respond to "ADSM: Dist Stor Manager" > > TSM 5.5.2.0 > AIX 5.3 > BA client 5.5.1 > TDP for Mail 5.5.1 > Cluster nodes CTNHEXMB01A and CTNHEXMB02A > Exchange client node EXMB01E > tsm: FSPHTSM1>q proxy target=EXMB01E > > Target Node Agent Node > --------------- ------------------- > EXMB01E CTNHEXMB01A > > We apparently have some configuration problem. When we try to run a > local VSS backup from the agent node(CTNHEXMB01A), it always fails with > "ANS1033E (RC-53) An invalid TCP/IP address was specified." We have > tried looking at all the documentation, with no resolution. I know this > is not much information to go on, but I thought maybe this failure > points to a specific problem. There is so much configuration > information involved, I preferred not to try to show it all, but will > provide whatever is needed. I also have a trace if that will help. > > Thanks, > Larry McNutt > The Timken Company > > ----------------------------------------- > This message and any attachments are intended for the individual or > entity named above. If you are not the intended recipient, please > do not forward, copy, print, use or disclose this communication to > others; also please notify the sender by replying to this message, > and then delete it from your system. The Timken Company / The > Timken Corporation
