TSM 5.4.2 AIX 5.3 TL8 Is there a way to view the logs when starting up a TSM instance to make sure there were no initialization errors but not capture all activity after startup? I normally start the instance with the following command which allows me to exit my telnet session but does not allow me to view the status of the startup
/usr/tivoli/tsm/server/tsmX/rc.tsmserv & There is also an option specified in my /etc/inittab to start each instance but I am not always ready to start them on bootup, however this too does not allow me to see any of the startup messages or errors? tsmXsrvr:2:once:/usr/tivoli/tsm/server/tsmX/rc.tsmserv >/dev/console 2>&1 Any help would be greatly appreciated. Dave Burdick Carolinas HealthCare System [email protected]<BLOCKED::blocked::mailto:[email protected]> ----------------------------------------- This electronic message may contain information that is confidential and/or legally privileged. It is intended only for the use of the individual(s) and entity named as recipients in the message. If you are not an intended recipient of this message, please notify the sender immediately and delete the material from any computer. Do not deliver, distribute or copy this message, and do not disclose its contents or take any action in reliance on the information it contains. Thank you.
