Status on server is pending. Communications is good, client backs up nightly as it is supposed to. We were testing an include option.
I agree with Richard, there needs to be some way to specify when it should run. I checked the server log, and after two hours the scheduler had not attempted to contact the client. This is a recurring problem with clientactions, and needs to be addressed. Thank you all for your suggestions. Gary Lee Senior System Programmer Ball State University phone: 765-285-1310 -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[email protected]] On Behalf Of John Monahan Sent: Friday, June 19, 2009 2:37 PM To: [email protected] Subject: Re: Making sure clientactions start Is the status from the server side pending or started (or something else)? The client can only run one scheduled task at a time. Another possibility is it is still running something else. ______________________________ John Monahan Infrastructure Services Consultant Logicalis, Inc. 5500 Wayzata Blvd Suite 315 Golden Valley, MN 55416 Office: 763-226-2088 Mobile: 952-221-6938 Fax: 763-226-2081 [email protected] http://www.us.logicalis.com > -----Original Message----- > From: ADSM: Dist Stor Manager [mailto:[email protected]] On Behalf > Of Huebner,Andy,FORT WORTH,IT > Sent: Friday, June 19, 2009 11:37 AM > To: [email protected] > Subject: Re: Making sure clientactions start > > Is the client running is schedule mode? If so stop and start the > acceptor and wait 1 minute then check the log. > If you are looking for reason, then check the server log, a quick > search on the node name should help. Our most common problem is the > server cannot contact the node due to an IP resolution problem. When > the scheduler contacts the server IP resolution is not needed to start > the job. > > Andy Huebner > -----Original Message----- > From: ADSM: Dist Stor Manager [mailto:[email protected]] On Behalf > Of Lee, Gary D. > Sent: Friday, June 19, 2009 10:17 AM > To: [email protected] > Subject: [ADSM-L] Making sure clientactions start > > I have a clientaction defined for a node whose schedmode is set to > prompted. > However, I have now been waiting for 45 minutes for the action to take > place. > > Is there a way to get the server to kick itself and prompt the client > to perform the actions in a clientaction? > > Gary Lee > Senior System Programmer > Ball State University > phone: 765-285-1310 > > > > > This e-mail (including any attachments) is confidential and may be > legally privileged. If you are not an intended recipient or an > authorized representative of an intended recipient, you are prohibited > from using, copying or distributing the information in this e-mail or > its attachments. If you have received this e-mail in error, please > notify the sender immediately by return e-mail and delete all copies > of this message and any attachments. > Thank you.
