"Backup Archive Client Backup Summary" reports that all clients have 0 in "Percent Compressed".
I´ll try and create a new deviceclass for tapes, and see if that could change anything. -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[email protected]] On Behalf Of Richard Sims Sent: den 26 oktober 2009 15:26 To: [email protected] Subject: Re: [ADSM-L] 3592 drives no compression On Oct 26, 2009, at 9:42 AM, Lars-Erik Öhman wrote: > It´s generation 1 drives, and the driver is the latest from IBM > (September 2009). > > I check in device manager and the driver version is 6.2.0.1 > (3592J1A), and it even say in "Tape drive parameters" that > Compression capable is TRUE, and Compression enabled TRUE. Okay - that helps narrow it down. You indicate that the client options do not specify that the client should be doing compression. Do some 'dsmc query options' to assure that. Another thing to check is whether the REGister Node that was used for these clients specified COMPression=Yes - or check the session summary report from recent backups, for compression indications. Beyond that, the cause is obscure. I would pursue by defining a temporary storage pool and mgmt class (for tape isolation) performing a backup on a very large, ordinary-content file, look at the backup statistics, then perform a Select on it in the Backups table to look for comparable size there, to see if there is any compression in the path to TSM. Outside of TSM, you might take a drive from TSM, mount a spare 3592 tape via your OS and have a program write ordinary data to it until EOT was reached, where it would report its progress, and you could then assess compression. Richard Sims This communication is from a Carnegie company within the Carnegie Group. The information contained in it, including any attachment or enclosure, is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any unauthorised use, review, retransmissions, dissemination, copying or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete or shred the material immediately. Thank you. Opinions, conclusions and other information expressed in this message are not given or endorsed by my firm or employer unless otherwise indicated by an authorised representative independent of this message.
